Choose Your Product
No Product SelectedSelect Product
Numeric error codes - 3000 C200; Lenovo N100, N200, N500, V100, V200
Other error messages, codes, or symptoms
Error messages
Beep and no beep symptoms
Intermittent and undetermined problems
LCD related symptoms

If you are unable to find your particular symptom or error, please refer to Need more help?

Notes:

  • The most likely cause is listed first.
  • A numeric error is displayed for each error detected in POST or system operation.
  • In the displays, n can be any number.

Error code
Symptom or error
Field replaceable unit or action, in sequence
0200Failure Fixed Disk
  1. Reseat the hard drive
  2. Run the BIOS Setup Utility and Load Setup Defaults
  3. Hard drive
  4. System board
021xKeyboard error
  1. Keyboard
  2. System board
0220Monitor type does not match CMOS—Run SETUPRun the BIOS Setup Utility and Load Setup Defaults
0230Shadow RAM Failed at offset:nnnnSystem board
0231Shadow RAM Failed at offset:nnnn
  1. DIMM
  2. System board
0232Extended RAM Failed at offset:nnnn
  1. DIMM
  2. System board

 

0250System battery is dead—Replace and run SETUP
  1. Charge the backup battery for more than 8 hours by connecting the AC adapter.
  2. Replace the backup battery and run BIOS Setup Utility to reset the time and date.
0251System CMOS checksum bad—Default configuration use
  1. Charge the backup battery for more than 8 hours by connecting the AC adapter.
  2. Replace the backup battery and run BIOS Setup Utility to reset the time and date.
0260System timer error
  1. Charge the backup battery for more than 8 hours by connecting the AC adapter.
  2. Replace the backup battery and run BIOS Setup Utility to reset the time and date.
  3. System board
0270Real time clock error
  1. Charge the backup battery for more than 8 hours by connecting the AC adapter.
  2. Replace the backup battery and run BIOS Setup Utility to reset the time and date.
  3. System board
0280Previous boot incomplete— Default configuration used
  1. Run the BIOS Setup Utility and Load Setup Defaults
  2. DIMM
  3. System board
02F4EISA CMOS not writable
  1. Run the BIOS Setup Utility and Load Setup Defaults
  2. Replace the backup battery
  3. System board
02F5DMA test failed
  1. DIMM
  2. System board
02F6Software NMI failed
  1. DIMM
  2. System board
02F702F7Fail-safe timer NMI failed
  1. DIMM
  2. System board

Need more help?
Please select one of the the following options for further assistance:

How to access the BIOS - Value Line notebooks
Service parts list index - Value Line notebooks
Troubleshooting
Submit a technical question
Contact your local technical Support Center


If you are unable to find what you are looking for, please do try the following options:
1. Lenovo Assisted Search
2. Product usage and general troubleshooting tips
3. Lenovo Support Forum
4. Technical Support Call Centre

Country Availability
AvailableWorldwide
Document ID : HT035579
Legacy Document ID : MIGR-63548
Last Updated :
Copyright © Lenovo 2013, all rights reserved
Was this page helpful to you?YesNo


   
Select Task
 
Drivers & Software  
Guides & Manuals  
Diagnose & Fix  
Warranty & Services  
Parts  
Accessories  

ADDITIONAL RESOURCES
Driver Matrix
COMMUNITY
Community KnowledgeBase
Community Forums
Lenovo Assisted Search
Windows 8 Support