version 2FKT25A

• Enhances fan control to match processor updates
• Fixes a problem where PCI game port cards would not work

version 2FKT24A

• Adds an enhancement for SMRam security

version 2FKT23A

• Fixes a problem where the power LED turns off when the onboard ethernet is disabled
• Fixes a problem where a 1762 POST error occurs when a USB key is added or removed and the Administrator Password is present
• 8603 POST errors are now logged in the DMI error log as bit 30

version 2FKT22A

• Ensures that POST 1806 errors are logged in SMBIOS
• Fixes a CD-ROM enumeration problem
• Removes incorrect text from Setup

version 2FKT21A

• Fixes potential CMOS checksum 0162 errors
• Fixes intermittent 0197 POST errors
• Fixes a problem where the system may potentially hang during S3 resume
• Fixes a problem where an nVidia Quadro4 video card does not work in PCI slot 2

version 2FKT20A

• Fixes invalid programming of Broadcom LAN BAR
• Adds processor microcode for the 0F49 processor

version 2FKT19A

• Fixes an S3 resume problem with nVidia NV6200 PEG video adapter
• Fixes a problem where there is a loss of video after S3 with Windows 2000 and a GeForce 6600 video adapter
• Adds code to ensure that the system turns off after boot block recovery
• Adds code to ensure that Wake On LAN boots take the "automatic" boot path
• Fixes the hard drive (HDD) timeout switch in BIOS Setup

version 2FKT18A

• Fixes a problem where the system hangs when resuming from S3 standby when the boot drive is connected to SATA connector 3 or 4
• Fixes a problem where NX BIOS setup options were backwards (enable actually disabled the function)
• Fixes a problem where the COM2 port address is not set in the BDA
• Updated the Lenovo splash screen

version 2FKT17A

• Fixes a problem where the video screen is blank when using the ADD2-R adapter

version 2FKT16A

• Fixes a problem where the system does not turn off after boot block recovery
• Hides Ethernet when disabled in Setup
• Adds code to issue hard drive "freeze lock" command to all drives on return from S3 power state
• Fixes a problem where Transfer mode becomes PIO after disabling parallel ATA
• Updates video BIOS to address ADD-2 card problem with monitor detection

version 2FKT15A

• Issues hard drive Freeze Lock command to all drives on S3 return
• Fixes a problem where the system hangs after a boot block recovery when custom defaults are set. This problem was injected in 2FKT14A.
• Winphlash.exe now accepts 12 character passwords

version 2FKT14A

• Increases the number of parameters accepted by flash2.exe
• Adds cfgedt2F.exe to the 2FJ514A.EXE
• Ensures Loading Custom Defaults settings remain after the system is rebooted
• Adds 12 character password support to the BIOS WinPhlash interface. Still waiting for the update of Winphlash.exe program to support 12 character passwords.
• Fixes a Setup typo in the Automatic Power On help text
• Fixes SMBIOS structures
• Wake on LAN now follows the Automatic Startup Sequence
• Fixes an intermittant problem detecting the hard drives when they are connected to connectors SATA2 or SATA3
• Fixes a problem that causes the SATA transfer mode becoming PIO after the PATA drives were disabled
• Warning is now displayed during POST if a high power processor is used in the system
• Improves the rear USB port signal quality
• Adds Lenovo copyright statement

version 2FKT13A

• Fixes a problem that prevents some video device drivers from loading
• Fixes a problem where the flash diskette hangs before the BIOS update starts

version 2FKT12A

• Fixes a problem displaying the MAC address in the Setup screen
• Improves USB port signal quality

version 2FKT11A

• Initial Production Release