Beep and no beep codes - ThinkPad A30/p, A31/p
 |
|
|
|
|
| One beep and a blank, unreadable, or flashing LCD. | - Reseat the LCD connector.
- LCD assembly.
- External CRT.
- System board.
| | One long and two short beeps, and a blank or unreadable LCD. | - System board.
- LCD assembly.
- DIMM.
| | Two short beeps with error codes. | POST error. Note: Click here for post error code definitions. | | Two short beeps with blank screen. | - System board.
- DIMM.
| | Three short beeps, pause, three more short beeps, and one short beep. | - DIMM.
- System board
| | Only cursor appears. | Reinstall operating system. |
|
| No beep, power-on indicator on, LCD blank, and no POST. | - Make sure that every connector is connected tightly and correctly.
- DIMM.
- System board.
| | No beep, power-on indicator on, and LCD blank during POST. | - Reseat DIMM.
- System board.
| | The power-on password prompt. | A power-on password or a supervisor password is set. Type the password and press Enter. | | The hard disk drive password prompt. | A hard disk drive password is set. Type the password and press Enter. | | The DOS full screen looks smaller. | Start the ThinkPad Configuration program and set the Screen expansion function. |
|
|
|
|
|
| Country Availability |
| Available | Worldwide
|
Document ID
: HT036182
Legacy Document ID
: MIGR-39660
Last Updated
:
Copyright © Lenovo 2013, all rights reserved
Cart
Loading... Please Wait...
