Choose Your Product
No Product SelectedSelect Product
NVidia Quadro 600 (0A36183), NVidia NVS 300 (0A36528) - Monitor icons in NVIDIA control panel does not work correctly under multi-display mode in driver v267.45
Symptom

Duplicate steps:

  1. Install NVIDIA graphic card, and insert two monitors.
  2. Under Windows Vista, install driver v267.45 to system.
  3. Open NVIDIA control panel, choose Set up multiple displays. Enable two displays and set to clone mode, then the icons showed 2a & 2b (the normal status is 1a & 1b), and the identify display function does not work -- Issue point 1
  4. Then set the display to extend mode, the icon area showed 1 & 1 or only one 1 (the normal status is 1 & 2) -- Issue point 2
  5. When the above issue happened, close the control panel. Sometimes it pops up error message NVIDIA Control Panel Application 3.5.798.0 has stopped working -- Issue point 3
Affected configurations

Nvidia graphic card driver v267.45 installed on following graphic card:

  • NVIDIA Quadro 600 96-core CUDA 1GB Dual-Link DVI-I, DisplayPort Graphics Card (Marketing part number: 0A36183)
  • NVIDIA NVS 300 DMS59 Dual-VGA, Dual-DVI Graphics Card (Marketing part number: 0A36528)

Impacted Operating System: Windows Vista (32-bit, 64-bit)

Solution

Close and re-open the NVIDIA control panel.

Additional information

The issue is 20% probability occurred.



If you are unable to find what you are looking for, please do try the following options:
1. Lenovo Assisted Search
2. Product usage and general troubleshooting tips
3. Lenovo Support Forum
4. Technical Support Call Centre

Country Availability
AvailableWorldwide
Document ID : HT051753
Last Updated : 27 Feb 2014
Copyright © Lenovo 2013, all rights reserved
Was this page helpful to you?YesNo


   
Select Task
 
Drivers & Software  
Guides & Manuals  
Diagnose & Fix  
Warranty & Services  
Parts  
Accessories  

ADDITIONAL RESOURCES
Driver Matrix
COMMUNITY
KnowledgeBase Featured Articles
Community KnowledgeBase
Community Forums
Lenovo EMC
Windows 8 Support