Cart
Loading... Please Wait...|
Laptops & Tablets
|
Desktop & All-In-Ones
|
Servers
|
Workstations
|
Smartphones
|
Accessories & Upgrades
|
Monitors & Projectors
|
|
|||||
|
|||||
LCD unit removal and installation - ThinkPad Edge E10, Edge 11
For access, remove these FRUs in order:
- Battery pack
- Bottom door
- Hard disk drive (HDD)
- Keyboard
- Palm rest assembly, power-on board assembly (with cable), and microphone
- System board, fan assembly, and backup battery
| Step | Screw (quantity) | Color | Torque |
| 1 | M2 x 4 mm, wafter-head, nylon-coated (2) | Silver | 0.181 Nm (1.85 kgfcm) |
In step [2], release all of the antenna cables from the cable guides.
When installing:
- Make sure that you route the cables firmly as shown in this figure.
- When you route the cables, make sure that they are not subjected to any tension. Tension could cause the cables to be damaged by the cable guides, or a wire to be broken.
| Step | Screw (quantity) | Color | Torque |
| 3 | M2.5 x 4 mm, wafter-head, nylon-coated (4) | Silver | 0.181 Nm (1.85 kgfcm) |
If you are unable to find what you are looking for, please do try the following options:
1. Lenovo Assisted Search
2. Product usage and general troubleshooting tips
3. Lenovo Support Forum
4. Technical Support Call Centre
| Country Availability | ||
|---|---|---|
| Available | Worldwide |
|
Legacy Document ID : MIGR-76350
Last Updated :
Copyright © Lenovo 2013, all rights reserved
| ADDITIONAL RESOURCES | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
||||||||||
| COMMUNITY | ||||||||||
|
