Choose Your Product
No Product SelectedSelect Product
Palm rest assembly with cables removal and installation - ThinkPad Edge 14 and 15
Palm rest assembly with cables removal instructions

For access, remove this FRUs in order:

Note:
In models with the fingerprint reader, the sensor is attached to the palm rest FRU. If the fingerprint reader has any defects, you can replace it by the procedures given in this section, which are the same for a palm rest with or without a fingerprint reader.

Remove the screws

StepScrew (quantity)ColorTorque
1M2 × 5 mm, wafer-head, nylon-coated (2)Black0.181 Nm (1.85 kgfcm)
1aM2 × 5 mm, wafer-head, nylon-coated (1)Black0.181 Nm (1.85 kgfcm)
2M2 × 3 mm, wafer-head, nylon-coated (1)Black0.181 Nm (1.85 kgfcm)

Remove palm rest



Palm rest assembly with cables installation instructions

When installing:

  1. Attach the cables to the system board firmly.
  2. Attach the palm rest so that the two small projections of the palm rest firmly fit into the guide holes of the keyboard bezel as shown in this figure.

  1. Push the front side of the palm rest until it clicks into place.

  1. Close the LCD cover and turn the computer over. Then fasten the screws to secure the palm rest.
Purchase parts online


If you are unable to find what you are looking for, please do try the following options:
1. Lenovo Assisted Search
2. Product usage and general troubleshooting tips
3. Lenovo Support Forum
4. Technical Support Call Centre

Country Availability
AvailableWorldwide
Document ID : PD005718
Legacy Document ID : MIGR-75095
Last Updated :
Copyright © Lenovo 2013, all rights reserved
Was this page helpful to you?YesNo


   
Select Task
 
Drivers & Software  
Guides & Manuals  
Diagnose & Fix  
Warranty & Services  
Parts  
Accessories  

ADDITIONAL RESOURCES
Support Help Index
Warranty Lookup
Product Detail
Technical Specifications - PSREF
Driver Matrix
COMMUNITY
KnowledgeBase Featured Articles
Community KnowledgeBase
Community Forums
Lenovo EMC
Windows 8 Support