|
Laptops & Tablets
|
Desktop & All-In-Ones
|
Servers
|
Workstations
|
Smartphones
|
Accessories & Upgrades
|
Monitors & Projectors
|
|
|||||
|
|||||
For access, remove these FRUs in order:

| Step | Screw (quantity) | Color | Torque |
|---|---|---|---|
| 1 | M2 × 5 mm, wafer-head, nylon-coated (4) | Black | 0.181 Nm (1.85 kgfcm) |
| 2 | M2 × 10 mm, wafer-head, nylon-coated (1) | Black | 0.181 Nm (1.85 kgfcm) |

| Step | Screw (quantity) | Color | Torque |
|---|---|---|---|
| 3 | M2 × 3 mm, wafer-head, nylon-coated (3) | Black | 0.181 Nm (1.85 kgfcm) |
When installing: Make sure that the connector is attached firmly.

When installing: Make sure that wireless switch is adjusted as shown in figure [a].


| Step | Screw (quantity) | Color | Torque |
|---|---|---|---|
| 11 | M2 × 3.5 mm, flat-head, nylon-coated (2) | Black | 0.181 Nm (1.85 kgfcm) |

Cable routing: Make sure that connectors are firmly attached and route the cables as shown in this figure.

|
Note: Applying labels to the base cover: The new base cover FRU is shipped with a kit containing labels of several kinds. When you replace the base cover, you need to apply the following labels:
Following labels need to be peeled off from the old base cover, and need to be put on the new base cover.
For some models, you also need to apply one or two FCC labels. Check the old base cover; if it has one or two FCC labels, find duplicates of them in the label kit and apply them to the new base cover. For the location of each label, refer the following figure:
|
| Purchase parts online |
| Country Availability | ||
|---|---|---|
| Available | Worldwide |
|
| ADDITIONAL RESOURCES | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
||||||||||
| COMMUNITY | ||||||||||
|