For access, remove these FRUs in order:

• Battery pack FRU.
• Hard disk drive (HDD) cover, HDD and HDD rubber rails or solid state drive (SSD) and storage converter FRU.
• Palm rest or palm rest with fingerprint reader FRU.
• Keyboard FRU.
• Keyboard bezel and speaker assembly FRU.
• Wireless USB adapter or Intel Turbo Memory Minicard FRU
• PCI Express Mini Card for wireless LAN/WiMAX FRU
• LCD unit FRU.
• LCD front bezel (LCD cover kit) FRU.
• Inverter card FRU.
• Integrated camera FRU.
• Bluetooth daughter card (BDC-2.1) FRU.
• LCD panel, hinges, and LCD cable FRU
• Second LCD bezel (second LCD cover kit) FRU
• Second LCD panel FRU

When installing: After replacing the hinges or the second LCD rear cover and reinstalling the second LCD cable and the second LCD panel, press the second LCD unit into the main LCD rear cover [a]. Then make sure that the right side of the second LCD unit is aligned to the right edge of the main LCD cover as shown in [b] in this figure. To adjust the alignment, adjust the fastening of screws [c].