To replace the modem daughter card, first connect the modem cable.
Using the screw holes as a guide, align the card into position and snap it into place.
Secure it using the two retaining screws.
To replace the keyboard, connect the keyboard ribbon cable to the systemboard and lay the keyboard into position.
Turn the machine over and replace the single keyboard retaining screw.
To replace the palm rest, connect the TouchPad ribbon cable to the systemboard, and starting at the front edge of the chassis, rotate the palm rest into position as shown, making sure the top corners of the bezel are secure.
Turn the machine over and replace the four palm rest retaining screws.
To replace the battery, align the battery on the rails and slide it in place until it latches.