Choose Your Product
No Product SelectedSelect Product
Keyboard removal and installation - ThinkPad R400, T400
For access, remove these FRUs, in order:
  1. Battery.
  2. Palm rest or palm rest with fingerprint reader.

Note:

In models with the fingerprint reader, the sensor is attached to the palm rest FRU. If the fingerprint reader has any defects, you can replace it by the procedures given in this section, which are the same for a palm rest with or without a fingerprint reader.

Step 1

For T400
Step Icon Screw (quantity) Color Torque
1 71260_icon.gif M2 × 14 mm, flat-head, nylon-coated (1) Black 0.167 Nm(1.7 kgfcm)

For R400
Step Icon Screw (quantity) Color Torque
1 71260_icon.gif M2 × 17 mm, flat-head, nylon-coated (1) Black 0.167 Nm(1.7 kgfcm)

Lift the keyboard a little in the direction shown by arrow (2), and then detach the connector (3).

Step 2-3

When installing: Make sure that the keyboard edges (a) are under the frame as shown in this figure.

Step a

Purchase parts online


If you are unable to find what you are looking for, please do try the following options:
1. Lenovo Assisted Search
2. Product usage and general troubleshooting tips
3. Lenovo Support Forum
4. Technical Support Call Centre

Country Availability
AvailableWorldwide
Document ID : PD013799
Legacy Document ID : MIGR-71485
Last Updated :
Copyright © Lenovo 2013, all rights reserved
Was this page helpful to you?YesNo


   
Select Task
 
Drivers & Software  
Guides & Manuals  
Diagnose & Fix  
Warranty & Services  
Parts  
Accessories  

ADDITIONAL RESOURCES
Support Help Index
Warranty Lookup
Product Detail
Technical Specifications - PSREF
Driver Matrix
COMMUNITY
KnowledgeBase Featured Articles
Community KnowledgeBase
Community Forums
Lenovo EMC
Windows 8 Support