For access, remove these FRUs in order:

• Digitizer pen FRU.
• Battery Pack FRU.
• Hinge caps FRU.
• Keyboard FRU.
• Extension cable card FRU.
• Palm rest FRU.
• PCI Express Mini Card for wireless LAN FRU.
• PCI Express Mini Card for wireless WAN FRU.
• Intel Turbo Memory Minicard or wireless USB adapter FRU.
• Keyboard bezel FRU.
• LCD assembly FRU.
• LCD front bezel FRU.
• Micro-Processor card FRU.
• Inverter card FRU.
• Hinges FRU.

Please perform the following steps as shown in the pictures below.

Protection plate LCD model:

In step [4], detach the claws. Then remove the LCD panel .

When installing: Make sure that all the claws are attached firmly.

Note: Step [5] is only for models with the integrated camera. For models without the integrated camera, skip step [5].

When installing: Make sure that the connector [5] is attached firmly.

Turn the LCD panel over, and then remove the LCD cable from the LCD panel.

When installing: Make sure that the LCD cable connector are attached firmly.

Please perform the following steps as shown in the pictures below.

Note: Step [2] is only for models with the integrated camera. For models without the integrated camera, skip step [2].

When installing: Make sure that the connector [2] is attached firmly.

Remove the LCD bracket L and R [a].

Turn the LCD panel over, and then remove the LCD cable [b] from the LCD panel.

When installing: Make sure that the LCD cable connector are attached firmly.

When installing: Make sure that the LCD cable connector are attached firmly. Removing and