Choose Your Product
No Product SelectedSelect Product
Hard disk drive cover, hard disk drive, and hard disk rubber rails removal and installation - ThinkPad R500

For access, remove these FRUs in order:

  1. Remove battery.

Attention:

  • Do not drop the hard disk drive or apply any physical shock to it. The hard disk drive is sensitive to physical shock. Improper handling can cause damage and permanent loss of data.
  • Before removing the drive, have the user make a backup copy of all the information on it if possible.
  • Never remove the drive while the system is operating or is in suspend mode.

Step 1

StepScrew (quantity)ColorTorque
1Hard disk drive screw (M2 × 17 mm), pan-head, nylon-coated (1)Black0.167 Nm(1.7 kgfcm)

Step 2

Step 3

When installing: Make sure that the hard disk drive connector is attached firmly.

Step 4

When installing: The rubber rails on the hard disk drive must be attached to the replacement drive. Otherwise the drive cannot be installed properly.

Purchase parts online


If you are unable to find what you are looking for, please do try the following options:
1. Lenovo Assisted Search
2. Product usage and general troubleshooting tips
3. Lenovo Support Forum
4. Technical Support Call Centre

Country Availability
AvailableWorldwide
Document ID : PD012000
Legacy Document ID : MIGR-71240
Last Updated :
Copyright © Lenovo 2013, all rights reserved
Was this page helpful to you?YesNo


   
Select Task
 
Drivers & Software  
Guides & Manuals  
Diagnose & Fix  
Warranty & Services  
Parts  
Accessories  

ADDITIONAL RESOURCES
Support Help Index
Warranty Lookup
Product Detail
Technical Specifications - PSREF
Driver Matrix
COMMUNITY
KnowledgeBase Featured Articles
Community KnowledgeBase
Community Forums
Lenovo EMC
Windows 8 Support