Choose Your Product
No Product SelectedSelect Product
Fan assembly removal and installation - ThinkStation D10 (type 6427, 6493)

This section provides instructions on how to replace the fan assembly. These removal instructions apply to the both the front fan and the rear fan.

  1. Open the computer cover. See "Cover removal".
  2. Note the routing of the fan-assembly wiring. See "Locating system board connectors and components". Disconnect the fan-assembly-wiring connector from the system board.
  3. Remove the adapter cards to access the fans. See "Accessing system board components and drives".
  4. If you are replacing the front fan, remove the fan bracket .
  5. Remove the fan assembly by releasing the fan grommets (1). Then remove the fan and wiring.

fan_assembly

  1. Install the new fan assembly using the grommets (1), route the wiring, and then connect the fan-wiring connector to the system board. .See "Locating system board connectors and components".
  2. If you are installing the front fan, reinstall the fan bracket.
  3. Reinstall any adapter cards that were removed. See "Adapter card removal and installation".
  4. Go to "Completing the FRU replacement".

 

 

Purchase parts online


If you are unable to find what you are looking for, please do try the following options:
1. Lenovo Assisted Search
2. Product usage and general troubleshooting tips
3. Lenovo Support Forum
4. Technical Support Call Centre

Country Availability
AvailableWorldwide
Document ID : PD005499
Legacy Document ID : MIGR-69495
Last Updated :
Copyright © Lenovo 2013, all rights reserved
Was this page helpful to you?YesNo


   
Select Task
 
Drivers & Software  
Guides & Manuals  
Diagnose & Fix  
Warranty & Services  
Parts  
Accessories  

ADDITIONAL RESOURCES
Support Help Index
Warranty Lookup
Product Detail
Technical Specifications - PSREF
Driver Matrix
COMMUNITY
KnowledgeBase Featured Articles
Community KnowledgeBase
Community Forums
Lenovo EMC
Windows 8 Support