Optional hard drive mounting bracket removal or pivoting - ThinkCentre A51, A52, M52, M52e
The optional hard drive mounting bracket can easily be pivoted upward or removed if necessary to enable replacement of some CRUs and FRUs.
Note: There appears to be two drive bays in the bracket. However, due to thermal restrictions, only the bay (2) at the rear of the chassis can be used to install a hard drive.
- To pivot the optional hard drive bracket upward, pull outward at the bottom of the bracket.
Note: You might have to disconnect the cables attached to the optional hard drive.
- If it is necessary to remove the optional hard drive mounting bracket, disconnect the cables attached to the optional hard drive, remove the two screws, and lift the bracket out of the chassis.
Legacy Document ID
Copyright © Lenovo 2013, all rights reserved