Input voltage: 90-264 V ac, 50/60Hz Heat dissipation (Maximum): 410 Btu/hr Power consumption (Maximum): 120 watts Power consumption (Normal Use):100 watts Power consumption (VESA Standby): < 2 watts Power consumption (VESA Suspend): < 2 watts Power consumption (VESA Off): < 2 watts Maximum earth leakage current:<3.5 mA at 264 V ac
* The noise emission level stated is the declared (upper limit) A-weighted sound power level, in bels, for a random sample of monitors. All measurements are made in accordance with ANSI S12.10 and reported in conformance with ISO/DIS 7779.
Note: Actual power consumption depends on the screen mode used, the images displayed, and how user controls are set.
Ergonomics
Compliance to the ISO Standard 9241 Part 3 for front-of-screen ergonomics is provided when the product forms part of an ISO-compliant system.
Emissions
All the monitors meet the Swedish Board for Technical Accreditation (SWEDAC) MPR-II emission guidelines for electric, magnetic and electrostatic emissions.
Limitations
Horizontal and vertical sync signal timings are critical to achieving acceptable screen images. As a consequence, support for all possible variations in H/V sync timings for any display mode cannot be stated.
The number of colors shown in any display mode is not limited by the monitor, but depends upon the capabilities of the adapter the monitor is attached to.
Mains harmonic reduction is only effective during normal operation and not during power management.
The power management function is invoked only after initiating signals are received from the attached system unit or graphics adapter. The method used to implement power management follows the VESA DPMS standard. This standard must also be implemented in the attaching system unit and/or graphics adapter for monitor power management to be effective.
Implementation of monitor Plug and Play follows the VESA DDC standard. This standard must also be implemented in the attaching system unit hardware and software to be effective.
Not all system units are DDC-enabled. In this situation, the user must configure the system to obtain optimum performance from the system/graphic adapter/monitor combination.
Cart
Loading... Please Wait...
