Movie player help

Front USB and audio card assembly installation movie

To remove the front USB and audio card assembly:

1. Disconnect the front USB and audio card signal cable from the system board.
2. Disconnect the power switch and LED cable from the front USB and audio card.
3. Remove the single screw securing the front USB and audio card assembly to the chassis.
4. Lift the assembly up to free it from the locking tabs and carefully feed the cable through the cut out in the chassis.
5. Disconnect the signal cable from the front USB and audio card.
6. Remove the two screws and remove the card from the bracket.

Additional information

Full service video CD available from http://www.pc.ibm.com/training.