Movie player help

Front USB and audio card assembly removal movie

To install the front USB and audio card assembly:

1. Connect the signal cable to the front USB and audio card.
2. Position the card in the chassis using the ports for alignment and tighten the two captive screws.
3. Rotate the drive bay to the service position, squeeze the retaining clip together and insert the ends of the retaining clips into the holes of the chassis.
4. Connect the front USB and audio card cable to the system board.
5. Connect the front USB and audio card cable to the system board.
6. Rotate the drive bay assembly down, being careful not to pinch any cables.
7. Install the top cover.
8. Place the cover over the front of the machine and rotate the rear of the cover down until the cover latches into place.

Additional information

Full service video CD available from http://www.pc.ibm.com/training.