Movie player help

System board removal movie

To install the system board:

1. Position the system board in the chassis using the screw holes and port cut out for alignment.
2. Leave approximately 1/2 inch of space between the board and the rear frame
3. Gently lift the board slightly, and slide to the rear until the screw holes are aligned and the latches secure the board in place.
4. Secure the system board to the chassis using the seven screws.
5. Connect the following signal cables to the system board: SATA, CD-ROM, and diskette.

Additional information

View detailed system board removal and installation instructions for 8095, 8420, 8421, 8141, 8142, 8145 systems.

Full service video CD available from http://www.pc.ibm.com/training.