The new PC2-3200 CL3 and PC2-4300 CL4 Non-Parity (NP) DDR2 SDRAM UDIMM memory offerings let you upgrade standard system memory capacity to improve overall system performance.
Features:
Test-proven 100% compatibility on listed systems
Maximum data transfer rate of up to 3,200 MBps and 4,300 MBps
240-pin UDIMM with gold-plated leads
Serial presence detect/decode functions
Authenticity seal on every UDIMM
Warranty
3 year Limited - customer carry-in exchange
Packaging
You will receive one box containing the following items:
Performance specifications as known at time of announcement
PC2-3200 and PC2-4300 DDR2 SDRAM memory upgrades -- The 3200 is a figure derived from twice the memory-side bus clock frequency (200 MHz x 2; data transfers can occur on both edges of the clock) times the module data width (64 bits / 8 bits / byte = 8 bytes) = 3,200. This is the maximum data rate; the units are MBps.
Column Address Strobe (CAS) Latency (CL) of 3 (memory bus clock cycles) for PC2-3200 and CL4 for PC2-4300 memory.
Non-parity mode organized as 32M x 64, and 64M x 64 respectively.
Serial presence detect with Serial EEPROM.
240-pin JEDEC/EIA standard UDIMM interface.
Gold-plated leads.
Physical, environmental, and compatibility specifications as known at time of announcement
Height
inches: .11 (single sided), .16 (double sided)
mm: 2.7 (single sided) , 4.0 (double sided)
Width
inches: 5.25
mm: 133.4
Depth
inches:
1.18
mm: 30
Operating temperature
between 0 degrees Celsius and 65 degrees Celsius
between 32 degrees Fahrenheit and 149 degrees Fahrenheit
Relative humidity
Operating: between 10% and 90%
Hardware compatibility
Hardware Requirements
The 256MB, 512MB, 1GB 2 PC2-3200 CL3 or PC2-4300 CL4 NP DDR2 SDRAM UDIMM memory upgrades are supported on the following systems:
System Name
Machine Type
Model
ThinkCentre A51p
8420, 8422, 8423, 8427
All
Hardware Requirements - Other systems
The 256MB, 512MB, 1GB PC2-3200 CL3 or PC2-4300 CL4 NP DDR2 SDRAM UDIMM memory upgrades are supported on other systems that support industry-standard SDRAM to the PC3200 CL3 UDIMM specification.