Movie player help

Modem Daughter Card installation movie

To remove the modem daughter card it is first necessary to remove the keyboard.

To remove the keyboard:

1. Turn the computer off.
2. Then disconnect the AC adapter and all cables from the computer.
3. Close the computer display and turn the computer over.
4. Slide the battery latch to the unlocked position. While holding the spring-loaded latch in the unlocked position, slide out the battery pack.
5. Remove the three screws, or four screws from the bottom of the machine depending on the model. The screws are identified with this icon.
6. Turn the ThinkPad over and open the cover.
7. Press between the F8 and F9 keys toward the back of the ThinkPad. The front of the keyboard pops up.
8. Lift up the keyboard.
9. Raise the flap over the cable connector.
10. Disconnect the cable.
11. Remove the keyboard.

Here is a closer look at the keyboard cable removal.

To remove modem daughter card:

1. Remove the two screws.
2. Lift the card off the connector,
3. Disconnect the cable and place the card on an Electrostatic Discharge (ESD) mat or static sensitive bag.

Note: Other systems might have other feature cards installed in this location.

ThinkPad movie index

Detailed Communication Daughter card installation and removal instructions

Full service video CD available from http://www.pc.ibm.com/training.