Choose Your Product
No Product SelectedSelect Product
Processor and fan sink removal and installation - NetVista 6644, 6645, 6646

Processor and fansink removal and installation

Processors are sensitive to static discharge.

  1. Disconnect the fansink cable from the system board.
  2. Grasp the tabs of the fansink stopper and squeeze before pulling it upward.

    disconnect fansink cable from system board.
  3. Press the fansink clasp to release the lock on both sides.
  4. Remove the fansink by pressing the release tab (rectangular end) and lifting it up from the Processor.
  5. Pull up the ZIF socket release lever.
  6. Lift the processor out of the socket.

    lift processor out of the socket.

  7. Place the ZIF socket release lever to the release (up) position.
  8. Insert the new processor, matching the notched corner of the processor with the pin 1 indicator on the socket.

    insert the new processor.
  9. Push down the lever to lock the processor to the socket.
  10. Place the processor heat sink fan over the processor.
  11. Insert one side of fan brace onto the ZIF socket.
  12. Secure by latching the other side to the ZIF socket.
  13. Reconnect the processor fan sink cable to the connector FN1 on the system board.

    reconnect the processor fan sink cable.
  14. Replace the fansink stopper.

    replace the fansink stopper
Purchase parts online

If you are unable to find what you are looking for, please do try the following options:
1. Lenovo Assisted Search
2. Product usage and general troubleshooting tips
3. Lenovo Support Forum
4. Technical Support Call Centre

Country Availability
Document ID : PD010573
Legacy Document ID : MIGR-4LPJ62
Last Updated :
Copyright © Lenovo 2013, all rights reserved
Was this page helpful to you?YesNo

Select Task
Drivers & Software  
Guides & Manuals  
Diagnose & Fix  
Warranty & Services  

Support Help Index
Warranty Lookup
Product Detail
Technical Specifications - PSREF
Driver Matrix
KnowledgeBase Featured Articles
Community KnowledgeBase
Community Forums
Lenovo EMC
Windows 8 Support