Choose Your Product
No Product SelectedSelect Product
CD-ROM drive removal - NetVista 6568, 6569, 6599, 6648, 6649, 6650

These instructions are also available in movie format:

  1. Remove the riser card housing (see Adapter installation).
  2. Remove the CD-ROM drive bracket retaining screw from the front of the chassis and remove the CD-ROM drive bracket from the drive bay.
  3. removing cd-rom

  4. Press the CD-ROM drive against the retaining springs in the bracket until the drive is squarely oriented in the bracket until the drive is squarely oriented in the bracket and release the drive You should hear a slight click as the drive is secured into the bracket.
  5. Install the slimline CD-ROM drive into the drive bay bracket, aligning the tabs on the bay bracket 1 with the rear of the slimline CD-ROM drive 2 and the tiny holes in the drive with the retaining pins in the drive bay bracket.
  6. Insert the CD-ROM drive and the bracket into the drive bay and replace the screw.


  7. insert drive into bracket and replace screw

  8. Replace the retaining lever behind the CD-ROM.

    replace retaining lever

Purchase parts online


If you are unable to find what you are looking for, please do try the following options:
1. Lenovo Assisted Search
2. Product usage and general troubleshooting tips
3. Lenovo Support Forum
4. Technical Support Call Centre

Country Availability
AvailableWorldwide
Document ID : PD012499
Legacy Document ID : MIGR-4LHR6P
Last Updated :
Copyright © Lenovo 2013, all rights reserved
Was this page helpful to you?YesNo


   
Select Task
 
Drivers & Software  
Guides & Manuals  
Diagnose & Fix  
Warranty & Services  
Parts  
Accessories  

ADDITIONAL RESOURCES
Support Help Index
Warranty Lookup
Product Detail
Technical Specifications - PSREF
Driver Matrix
COMMUNITY
KnowledgeBase Featured Articles
Community KnowledgeBase
Community Forums
Lenovo EMC
Windows 8 Support