Choose Your Product
No Product SelectedSelect Product
10/100 EtherLink PCI Management Adapter - Overview

At a glance
The 10/100 EtherLink PCI Management Adapters feature enhanced manageability including remote system alerts. This allows network administrators to monitor PCs for case intrusion, voltage and temperature levels, and boot failures. In addition, the adapters have an onboard managed PC Boot Agent for improved remote wake up capabilities, which enable network administrators to remotely install software, configure PCs, and backup hard drives.
 
The 10/100 EtherLink PCI Management Adapters include PC management features that permit power-up of PCs from a central point of management. The managed PC Boot Agent added to the adapter in the PC provides flexibility to perform a pre-OS boot. This allows the PC to boot from the network before loading the operating system. The remote wake up feature will respond to a magic packet signal sent from a remote management agent.
 
These 10/100 adapters provide 10Base-T Ethernet and 100Base-TX Fast Ethernet LAN attachment for Intel 80386, or higher, PCs with a PCI Bus. The adapters offer ease of use with a Microsoft Windows software diagnostic for easy installation and troubleshooting and LEDs that indicate link integrity and activity for both 10Mbps and 100Mbps. Additionally, the Dynamic Access Software brings intelligence to these adapters with features such as standards-based traffic prioritization and dRMON Smart Agent software for comprehensive and affordable network management. The adapters ship with device drivers for all leading operating systems and network operating systems.

Warranty
The warranty for this product is a limited lifetime customer carry-in exchange warranty from 3Com Corporation.  
Packaging
You will receive one box containing the following items:

  • Adapter Card
  • Wake On LAN Cable
  • User's Guide and Diskettes
  • Safety Guide
  • Flyer

Product marketing and replacement part numbers (FRU)
Part numbers applicable to: worldwide

  • Marketing part number: 09N3601
  • Replacement part number (FRU): 09N3609

Additional part numbers
Part number(s) for ordering multiple quantities
Cardpack: 09N3610
Bulkpack of 100: 09N3600
 
Product dates
Worldwide

  • Announce date: 17 Aug 1999
  • Planned availability date: 17 Aug 1999
  • Withdrawal date: 24 Dec 2002

Technical specifications
Performance specifications as known at time of announcement
This adapter supports data transfer at 10Mbps and 100Mbps depending on the hub it connects into.

Physical, environmental, and compatibility specifications as known at time of announcement

Width

  • 3.00 inches
  • 7.62 mm

Depth

  • 5.85 inches
  • 14.86 mm

Power requirements

  • 5V +/- 5% at 375 mA maximum
  • +3.3V +/- 5% at 375 mA maximum
  • +3.3V at 20 mA maximum in sleep state with RWU disabled
  • +5V auxiliary power for RWU supplied with 3-pin connector and cable
  • +3.3V auxiliary power for RWU supplied by PCI 2.2-compliant PCI Bus

Operating temperature

  • Between 0 degrees Celsius and 40 degrees Celsius
  • Between 32 degrees Fahrenheit and 104 degrees Fahrenheit

Relative humidity

  • Operating between 20% and 80% (non-condensing)

Agency approvals

  • FCC part 15, Subpart J Class B
  • UL
  • CE Mark
  • EN55022 Class B (CISPR B)
  • VCCI Clas 2

ENERGY STAR-compliant
No . The ENERGY STAR emblem does not represent EPA endorsement of any product or service.
 
Hardware requirements
These adapters can be used in any bus mastering PCI slot in a PC containing an Intel 80386, or higher, processor. The remote wake up feature can be used only in a PC which has been designed to support this capability. PCs which are compliant with PCI 2.2, enable this capability through the PCI bus. PCs which are not PCI 2.2-compliant must support the 3-pin header cable and provide auxiliary power for +5V +/-5%@375mA.

Software requirements

  • Microsoft Windows NT 3.51 and 4.0
  • Windows 95
  • Windows 98
  • Netware Client for NetWare 3.1.x or 4.x networks

Compatibility
This adapter is compatible with PCI 2.2, DMI 2.0, ACPI, Wired for Management (WfM) 1.1a, 2.0, Microsoft PC99 certification (WHQL), RMON, IEEE 802.1 P/Q, IEEE 802.3x, IEEE 802.3 ac, Pre-OS Boot Protocol Support (PXE 2.0, BootP/DHCP, NCP, RPL)

Note: For the latest updates on the compatible systems, please refer to the Accessories Compatibility Guide.
 
Limitations
This adapter requires drivers at EtherDisk level 5.0, or above. Some configurations may not be supported.

Cables and operating distances

  • 10BASE-T Category 3, 4, or 5 UTP on two pairs up to 100 m (328 ft)
  • 100BASE-TX Category 5 UTP on two pairs up to 100 m (328 ft)


If you are unable to find what you are looking for, please do try the following options:
1. Lenovo Assisted Search
2. Product usage and general troubleshooting tips
3. Lenovo Support Forum
4. Technical Support Call Centre

Country Availability
AvailableWorldwide
Document ID : PD004445
Legacy Document ID : MIGR-4L5LGQ
Last Updated :
Copyright © Lenovo 2013, all rights reserved
Was this page helpful to you?YesNo


   
Select Task
 
Drivers & Software  
Guides & Manuals  
Diagnose & Fix  
Warranty & Services  
Parts  
Accessories  

ADDITIONAL RESOURCES
Support Help Index
Warranty Lookup
Product Detail
Technical Specifications - PSREF
Driver Matrix
COMMUNITY
KnowledgeBase Featured Articles
Community KnowledgeBase
Community Forums
Lenovo EMC
Windows 8 Support