• Micro ATX / Microtower (4X5)

• Intel Pentium 4 with integrated L2 cache
• 400MHz or 533 MHz front-side bus with SSE2(TM) (Streaming SIMD extensions 2)
  and NetBurst Technology

• 256KB cache or 512KB on-die L2 advanced transfer cache

• Intel 845G chipset
• Memory Controller Hub (MCH)
• I/O Controller Hub (ICH4) for PCI 2.2 bus, six Request/Grant pairs
• Integrated 10/100 Mbit LAN controller
• SMBUS device support

• 266 MHz DDR (Double Data Rate) RAM
• 2 DIMM sockets (1 open)
• 2 - 184-pin DIMMS
• Supports a maximum memory up to 2.0GB
• ECC not supported
• Option part numbers for memory

• ATA-100
• Enhanced Local Bus IDE controller
• Read/write cache
• 5400RPM or 7200RPM
• Option part numbers for hard disk drives

• Intergrated in ICH4
• Single controller
• 2 separate channels, 4 drive support

• Enhanced IDE/ATAPI interface
  
• Less than 85 ms average access time and 128 KB buffer for look-ahead cache
  
• 12 cm and 8 cm disc compatibility (8 cm horizontal mount only)
  
• Front load tray and front panel audio jack and volume control
  
• Dust seal enclosure
  
• Option part numbers for CD-ROM drives

• Integrated PCI AC'97
• ADI 1981A CODEC
• Microphone, Line-in, line-out / headphone out
• Monospeaker out
• Software Emulation (Sound Blaster compatible) via Microsoft operating system
• External stereo speakers on selected models

• APM 1.2 and ACPI 1.0 compliant
  
• OnNow support
  
• Power-on suspend supported (soft on)
  
• S3 supported, wake from USB & keyboard

• 185 watt supply with variable speed fan
• 110 volt or 220 volt operation controlled by a switch on the back of the unit

• K56Flex Data
• V.90 data
• V.17 Class 1 14.4Kbps Fax
• PCI 2.1/2.2
  

• IBM Standard PS/2 104 key keyboard
• IBM ScrollPoint III mouse on selected models
• IBM Standard PS/2 2 button mouse
• Rapid Access Keyboard III on selected models
• Option part numbers for keyboards and mouse

• Microsoft Windows 2000
• Microsoft Windows XP Professional
• Microsoft Windows XP Home

NOTE: Preloaded software utilizes the disk-to-disk recovery method.

• RFID EEPROM
• Security slot (for attachment of optional cable lock)
• Power-on password
• Configuration password (administrator password)
• Boot sequence control
• Diskette boot inhibit
• Boot without keyboard or mouse
• Diskette I/O control
• Hardfile I/O control
• Serial port I/O control
• Parallel port I/O control

• Six USB (two in front, four in back) [Ver 2.0]
• One Ethernet RJ-45
• Two serial 9-pin
• One parallel (EPP, ECP), IEEE 1284
• Keyboard and mouse ports
• Audio line in, audio line out

• Slot 1: 3/4 length, 32-bit AGP 4X (1.5v) - used
  
• Slot 2: 3/4 length, 32-bit PCI 2.2 (5v)
  
• Slot 3: 3/4 length, 32-bit PCI 2.2 (5v)
  
• Slot 4: 3/4 length, 32-bit PCI 2.2 (5v)

• Bay 1: 5.25 inch, half-height 1.6 inch, access, standard CD-ROM
  
• Bay 2: 5.25 inch, half-height 1.6 inch , access, open
  
• Bay 3: 3.5 inch, slim-line 1 inch, external, floppy disk drive
• Bay 4: 3.5 inch, slim-line 1 inch, external, access, open
  
• Bay 5: 3.5 inch, slim-line 1 inch, internal, standard hard disk drive (no access)

• Standard warranty is 3 years parts / 1 years labor except for the following countries: Argentina has 3 years parts / 3 years labor
• For additional warranty information, refer to the Statement of limited warranty

Integrated Intel 845G

• 15-pin VGA output on planar
• Intel Dynamic Video Memory Technology (DVMT)
• AGP 4x equivalent speeds

ATI Radeon 7000 64MB (VGA) 4X AGP

• AGP 2.0 compliant
• Supports DirectX and Open GL
• VESA display power management support

nVidia GeForce4 MX420 64MB DDR (VGA & TV) 4X AGP

• 4X/2X with AGP texturing and fast writes
• High performance 256-bit 2D rendering engine
• Complete DirectX support, including DirectX 8.1
• Full OpenGL 1.3 support

nVidia GeForce4 Ti 4200 128MB (VGA & TV & DVI-D) 4X AGP

• nfiniteFX II engine for full programmability
• High resolution antialiasing
• nView display technology