• Micro ATX / Desktop (4X4)

• Intel Pentium 4 with integrated L2 cache
• 533MHz system bus

• 512KB on-die L2 advanced transfer cache

• Intel 845G chipset
• Memory Controller Hub (MCH)
• I/O Controller Hub (ICH4) for PCI 2.2 bus
• Integrated 10/100 Mbit LAN controller
• SMBUS device support

• 266 MHz DDR (Double Data Rate) RAM
• 2 DIMM sockets (1 open)
• 2 - 184-pin DIMMS
• Supports a maximum memory up to 2.0GB
• ECC not supported
• Option part numbers for memory

• ATA-100
• Enhanced Local Bus IDE controller
• Read/write cache
• 7200RPM
• Option part numbers for hard disk drives

• Intergrated in ICH4
• Single controller
• 2 separate channels, 4 drive support

• Enhanced IDE/ATAPI interface
• Less than 85 ms average access time and 128 KB buffer for look-ahead cache
• 12 cm and 8 cm disc compatibility (8 cm horizontal mount only)
• Front load tray and front panel audio jack and volume control
• Dust seal enclosure
• Option part numbers for CD-ROM drives

• Enhanced IDE/ATAPI interface
• Front load tray and front panel audio jack and volume control
• Option part numbers for DVD-ROM drives

• Integrated PCI AC'97
• ADI 1981A CODEC
• Microphone, Line-in, line-out / headphone out
• Monospeaker out
• Software Emulation (Sound Blaster compatible) via Microsoft operating system
• External stereo speakers on selected models

• APM 1.2 and ACPI 1.0 compliant
• OnNow support
• Power-on suspend supported (soft on)
• S3 supported, wake from USB & keyboard

• 185 watt supply with variable speed fan
• 110 volt or 220 volt operation controlled by a switch on the back of the unit

• Integrated Intel 10/100 MX with (Wake on Lan) or
• Intel Pro/1000 MX (gigabit)
• Option part numbers for network adapters

• IBM Standard PS/2 104 key keyboard
• IBM Standard PS/2 2 button mouse
• Option part numbers for keyboards and mice

• Microsoft Windows XP Professional

NOTE: Preloaded software utilizes the disk-to-disk recovery method.

• U-Bolt anchoring feature (U-Bolt assembly is optional; supports optional padlock)
• Security slot (for attachment of optional cable lock)
• Power-on password
• Configuration password (administrator password)

Promise of Value (POV) (Only on selected models)

• Daughtercard attached to system board which enables RF Asset ID
• Embedded security subsystem
• System key lock
• C2 tamper evident security switch

• Six USB (two in front, four in back) [Ver 2.0]
• One ethernet RJ-45
• Two serial 9-pin
• One parallel (EPP, ECP), IEEE 1284
• Keyboard and mouse ports
• Audio line in, audio line out and mic audio jacks

• Slot 1: full length, full height, 32-bit AGP 4X (1.5v) - used
• Slot 2: full length, full height, 32-bit PCI 2.2 (5v)
• Slot 3: full length, full height, 32-bit PCI 2.2 (5v)
• Slot 4: full length, full height, 32-bit PCI 2.2 (5v)

• Bay 1: 5.25-inch, half-height 1.6-inch, external access, CD-ROM/DVD-ROM
• Bay 2: 5.25-inch, half-height 1.6-inch, external access, open
• Bay 3: 3.5-inch, slim-line 1-inch, external access, floppy disk drive
• Bay 4: 3.5-inch, slim-line 1-inch, internal access, hard disk drive

• Standard warranty is 3 years parts / 3 years labor
• For additional warranty information, refer to the Statement of limited warranty

Integrated Intel 845G (2D/3D graphics)

• 15-pin VGA output on planar
• Intel Dynamic Video Memory Technology (DVMT)
• AGP 4x equivalent speeds

For models without a separate video card, memory supports both system and video.