Service parts

At a glance

The new 80GB 7,200RPM ATA/100 hard drive offers an upgrade selected from the highest-quality hard drives available.

Features include:

• 80,000MB formatted capacity
• 4.2 ms average latency
• Less than 9.0 ms typical average read seek time
• 2MB adaptive buffer
• Sustained data rates of 23 to 44 MBps
• 20GB per disk surface data recording density
• ATA/100 interface capability enabling up to 100MB/sec instantaneous interface data transfers
• Slim, one-inch-high profile
• Self-Monitoring Analysis and Reporting Technology (S.M.A.R.T.)

Warranty

3 year Limited - customer carry-in exchange

Packaging

You will receive one box containing the following items:

• 80GB 7,200RPM ATA/100 (EIDE) hard drive
• Screws
• User's guide and Ontrack Disk Manager 2000 CD
• Warranty supplement

Product dates

Worldwide

• Announce date: 04 Jun 2002
• Planned availability date: 14 Jun 2002

Technical specifications

Performance specifications as known at time of announcement

• Formatted capacity: 80GB
• Rotational speed: 7,200RPM
• Average latency: 4.2 ms
• Typical average read seek time: <9.0 ms
• Data buffer (adaptive segmented): 2MB
• Interface performance: Ultra ATA/100
• Burst transfer rate (maximum): 100MBps
• Sustained data transfer rate: 23 to 44 MBps
• Up to 384KB reserved for drive firmware

NOTE: The total user-accessible capacity can vary slightly based on operating system environments. Actual performance varies based on many factors and is often less than the maximum possible.

Physical, environmental, and compatibility specifications as known at time of announcement

Operating temperature

• Between 5 degrees Celsius and 55 degrees Celsius
• Between 41 degrees Fahrenheit and 131 degrees Fahrenheit

Relative humidity

• Operating: between 8% and 90% (non-condensing)

NOTE: To achieve the drive's potential high-reliability level, the system should provide sufficient air movement to maintain the drive surface temperature below 60 deg Celsius.

Agency approvals

• UL
• CSA
• TUV
• IEC
• C-Tick
• CE Mark
• BSMI

ENERGY STAR-Compliant

No

Hardware compatibility

The 80GB 7,200RTP ATA/100 (EIDE) hard drive is supported on the following systems:

* These systems can only accommodate a 7,200RPM drive if the standard drive already in the system is also 7,200RPM or if the system has an internal cooling fan in addition to the fans that are a part of the power supply or system processor.

Supported operating systems

Disk Manager 2000 is supported in the following environments:

• Microsoft Windows 2000
• Windows 98
• Windows Me
• Windows XP

Compatibility

Some configurations may not be compatible.

Other

Cable orders required: No

Installation time: Approximately 30 minutes