Choose Your Product
No Product SelectedSelect Product
System board removal and installation - NetVista 2283, 6274, 6596
  1. Remove all adapter cards.
  2. Disconnect all cables connected to the system board. Note the location and orientation of all cables.
  3. Remove the five screws securing the system board to the chassis.

    removing the system board

  4. Lift the system board to remove from chassis.
  5. Remove memory (DIMM) if applicable.
  6. Remove processor if necessary.

Installing the system board

  1. Before reinstallation, position the housing on its side. When installing a new system board, push the board to the rear and align it with the front locating pin.
  2. Visually verify that the board is aligned properly, then press the board down.
  3. Be sure to reinstall the processor, DIMMs, I/O port bracket onto the new system board if applicable.
  4. After installing the system board, secure with original screws.
  5. Change all jumper settings to match those of the original board.
  6. Reinstall other components into the machine i.e. drives, power supply, cables, etc.
  7. Upgrade the BIOS version on the new system board using the BIOS upgrade utility.
  8. Change the machine type and serial number in the BIOS to match the original planar BIOS settings.
  9. Reboot the system and run the Configuration/Setup Utility.
Purchase parts online

If you are unable to find what you are looking for, please do try the following options:
1. Lenovo Assisted Search
2. Product usage and general troubleshooting tips
3. Lenovo Support Forum
4. Technical Support Call Centre

Country Availability
Document ID : PD009566
Legacy Document ID : MIGR-42538
Last Updated :
Copyright © Lenovo 2013, all rights reserved
Was this page helpful to you?YesNo

Select Task
Drivers & Software  
Guides & Manuals  
Diagnose & Fix  
Warranty & Services  

Support Help Index
Warranty Lookup
Product Detail
Technical Specifications - PSREF
Driver Matrix
KnowledgeBase Featured Articles
Community KnowledgeBase
Community Forums
Lenovo EMC
Windows 8 Support