Service parts
	Files and drivers
	Publications

At a glance

Features:

• Optimum addressability of 1024 x 768 at 85 Hz refresh for flicker-free viewing
• Multifrequency operation with easy-to-use on-screen display user controls
• Compliance with ENERGY STAR power consumption guidelines *
• VESA DDC Plug and Play for quick, easy setup *
• MPR-II compliance and ISO Standard 9241, Parts 3, 7, and 8 capability for front-of-screen ergonomics *
• Universal voltage power supply

* PC system hardware and software dependent

Warranty

3 year Limited - customer carry-in exchange

Packaging

You will receive one box containing the following items:

• E54 color monitor
• Attachable tilt-swivel stand
• Attached video signal cable
• Separate power cord
• User's guide
• Diskette containing monitor installation files

Product dates

• Announce date: 30 Nov 2001 (India only)
• Planned availability date: Nov 2001 (India only)
• Withdrawal date: 15 Aug 2003

Technical specifications

Tilt-Swivel Stand characteristics:

• Tilt: +13/-5 degrees (13 degrees backward, 5 degrees forward)
• Swivel: +45/-45 degrees (45 degrees left, 45 degrees right)

Physical, environmental, and compatibility specifications as known at time of announcement

Note: Height and weight include the tilt and swivel stand.

Power requirements

• Input voltage: 90-264 V ac, 50/60 Hz (universal volt)
• Heat dissipation (Maximum): 256 Btu/hr
• Power consumption (Maximum): 75 watts
• Power consumption (Normal Use): 75 watts
• Maximum earth leakage current: <3.5 mA at 264 V ac

Actual power consumption depends on the screen mode used, the images displayed, and how user controls are set.

Altitude

• Operating: 3,000 m (10,000 ft) maximum

Regulatory agency approvals

Safety:

• UL 1950 First Edition (USA)
• IEC 950 CB Report

EMC:

• ECC Class B (USA)

Ergonomics:

• MPR-II (Sweden)
• Energy Star
• ISO 9241-3
• ISO 9241-7
• ISO 9241-8

Hardware compatibility

The E54 color monitor is supported on the following systems:

Software requirements

The E54 color monitor features preset and user-settable display modes. The actual display modes that are used are a function of the attaching system unit, its operating system, and application software.

Preset display modes:

Supported operating systems

• Microsoft Windows 98
• Windows 2000
• Windows Me
• Windows NT 4.0

Limitations

• Not all available display modes run at the high refresh rates necessary for flicker-free performance. Display modes at lower refresh rates are available for compatibility with older graphics adapters and system units.
• Supported display modes are a function of the attaching system unit. The full range of display modes available with these monitors may not be available or supported with all combinations of system units, their operating systems, and application software.
• Horizontal and vertical sync-signal timings are critical to achieving acceptable screen images. As a consequence, support for all possible variations in H/V sync timings for any display mode cannot be stated.
• The number of colors shown in any display mode is not limited by the monitor, but depends upon the capabilities of the adapter the monitor is attached to.
• Mains harmonic reduction is only effective during normal operation and not during power management.
• The power-management function is invoked only after initiating signals are received from the attached system unit or graphics
  adapter.
• Implementation of monitor Plug and Play follows the VESA DDC standard. This standard must also be implemented in the attaching system unit hardware and software to be effective.
• Not all system units are DDC-enabled. In this situation, the user must configure the system to obtain optimum performance from the system/graphic adapter/monitor combination.

Cable orders

An attached video signal cable is supplied. It is 1.5 meters (4.9 ft) long with a 15-pin, mini D-shell connector.