Choose Your Product
No Product SelectedSelect Product
Top case assembly removal and installation - ThinkPad Edge E520, E525

For access, remove this FRU:

Removal steps of top case assembly

Note: Your models may look slightly different from the illustration above.

Step Screw (quantity) Color Torque
1 M2x6 mm, wafer-head, nylon-coated (10) Black 0.181 Nm (1.85 kgfcm)


 

Note: Your models may look slightly different from the illustration above.

Step Screw (quantity) Color Torque
2 M2x3 mm, wafer-head, nylon-coated (4) Black 0.181 Nm (1.85 kgfcm)

Step Screw (quantity) Color Torque
3 M2×6 mm, wafer-head, nylon-coated (5) Black 0.181 Nm (1.85 kgfcm)

When installing: Make sure that the connector is attached firmly to the system board.

In step 6 , push the top case assembly out from the frame by using a plastic pry tool as shown in the following figure.

Remove the top case assembly in the direction shown by the arrow 7 , and then detach the connector 8 .

When installing: Make sure that the connector is attached firmly to the system board.

Purchase parts online


If you are unable to find what you are looking for, please do try the following options:
1. Lenovo Assisted Search
2. Product usage and general troubleshooting tips
3. Lenovo Support Forum
4. Technical Support Call Centre

Country Availability
AvailableWorldwide
Document ID : PD015277
Last Updated :
Copyright © Lenovo 2013, all rights reserved
Was this page helpful to you?YesNo


   
Select Task
 
Drivers & Software  
Guides & Manuals  
Diagnose & Fix  
Warranty & Services  
Parts  
Accessories  

ADDITIONAL RESOURCES
Support Help Index
Warranty Lookup
Product Detail
Technical Specifications - PSREF
Driver Matrix
COMMUNITY
KnowledgeBase Featured Articles
Community KnowledgeBase
Community Forums
Lenovo EMC
Windows 8 Support