Choose Your Product
No Product SelectedSelect Product
2010 LCD unit - ThinkPad X1

For access, disable the battery pack first. Refer to “1000 Disabling the battery pack in the UEFI BIOS” for detailed instructions.

Then remove these FRUs in order:

  • Please refer to “1010 Hard disk drive and solid state drive” for detailed instruction.
  • Please refer to “1020 Keyboard” for detailed instruction.
  • Please refer to “1080 Keyboard bezel assembly with fingerprint reader and audio sub card ” for detailed instruction.

Removal steps of LCD unit

Step Screw Screw (quantity) Color
Torque
[1]      O M2.5 x 6 (2)
Black 0.392 Nm
(4 kgfcm)

Before step [6] , strip off the tapes securing the antenna cables, and release the cables from the cable guides of the frame.

Removal steps of LCD unit (continued)


When installing:

  1. Route the antenna cables along the cable guides and secure them with the tapes. As you route the cables, make sure that they are not subjected to any tension. Tension could cause the cables to be damaged by the cable guides, or a wire to be broken.
  2. Make sure that the LCD connector is attached firmly.


If you are unable to find what you are looking for, please do try the following options:
1. Lenovo Assisted Search
2. Product usage and general troubleshooting tips
3. Lenovo Support Forum
4. Technical Support Call Centre

Country Availability
AvailableWorldwide
Document ID : PD015264
Last Updated :
Copyright © Lenovo 2013, all rights reserved
Was this page helpful to you?YesNo


   
Select Task
 
Drivers & Software  
Guides & Manuals  
Diagnose & Fix  
Warranty & Services  
Parts  
Accessories  

ADDITIONAL RESOURCES
Support Help Index
Warranty Lookup
Product Detail
Technical Specifications - PSREF
Driver Matrix
COMMUNITY
KnowledgeBase Featured Articles
Community KnowledgeBase
Community Forums
Lenovo EMC
Windows 8 Support