Choose Your Product
No Product SelectedSelect Product
Top Case Assembly - ThinkPad Edge E120, E125
Top case assembly removal and installation

For access, remove these FRUs in order:

Please perform the following steps as shown in the pictures below.

Step Screw (quantity) Color Torque
  • Front side: M2 × 5 mm, wafer-head, nylon-coated (2)
  • Rear side: M2.5 × 5 mm, wafer-head, nylon-coated (2)
Black 0.181 Nm (1.85 kgfcm)

Step Screw (quantity) Color Torque
2 M2 × 5 mm, wafer-head, nylon-coated (3) Black 0.181 Nm (1.85 kgfcm)

In step [8] , push the top case assembly out from the frame as shown in the following figure by using a plastic pry tool, and remove the top case assembly in the direction shown by the arrow

When installing: Make sure that all the projections of the top case assembly are attached firmly to the guide holes of the base cover.


Purchase parts online


If you are unable to find what you are looking for, please do try the following options:
1. Lenovo Assisted Search
2. Product usage and general troubleshooting tips
3. Lenovo Support Forum
4. Technical Support Call Centre

Country Availability
Document ID : PD015170
Last Updated :
Copyright © Lenovo 2013, all rights reserved
Was this page helpful to you?YesNo

Select Task
Drivers & Software  
Guides & Manuals  
Diagnose & Fix  
Warranty & Services  

Support Help Index
Warranty Lookup
Product Detail
Technical Specifications - PSREF
Driver Matrix
KnowledgeBase Featured Articles
Community KnowledgeBase
Community Forums
Lenovo EMC
Windows 8 Support