Installing DOS and its device drivers - ThinkPad 770X
This document describes the installation procedures for PC-DOS Version 7.0 and MS-DOS Version 6.2 and their device drivers.
 
Overall Procedure
 
 
  1. Have the DOS installation package in hand.
  2. Back up your software and personal data files on the hard disk.
  3. Go to the ThinkPad Web site and download the latest hardware drive diskettes. You need to create at least the following device driver diskettes:
  4. Install DOS and the device drivers.
 
Device Driver Diskette Name
ThinkPad ConfigurationprogramUtility Diskette for DOS, Personalization
PC Card support softwareCardSoft for DOS
Audio device driverAudio Features for Dos and Windows 3.1
CD-ROMCD-ROM Driver Diskette

Installing IBM PC DOS Version 7.0 or MS-DOS Version 6.2
To install DOS, follow the instructions in the DOS installation manuals.
 
Installing the ThinkPad Configuration Program for DOS
To install the ThinkPad Configuration program:
 
 
  1. Start DOS.
  2. Insert the Utility Diskette for DOS, Personalization into the diskette drive; then type A:\UINSTALL and press Enter .
  3. Press Enter .
  4. Click on Install DOS ThinkPad Configuration in the "Installation Options" window; then follow the instructions on the screen.
 
Installing PC Card Support Software for DOS
Notes:
If you are going to use a docking station with your computer, you need to uninstall CardSoft for DOS first, dock your computer to the docking station, and then reinstall it. If you are going to use the PC Card support software for Windows 3.1 (CardWizard), do not install that for DOS (CardSoft).
 
To install the PC Card support software, you need to add the following lines at the top of the CONFIG.SYS file.
DOS=HIGH,UMB
DEVICE=C:\DOS\MIMEM.SYS
 
To install the PC Card support software for DOS:
 
 
  1. Insert the CardWizard for Windows 3.1 Diskette into the diskette drive.
  2. At the DOS command prompt, type A:\INSTALL and press Enter . The installation window appears.
  3. Follow the instructions on the screen. During installation, use the Arrow keys to highlight your selection; then press Enter .
  4. After the installation is complete, remove any diskette from the diskette drive and restart the computer.
 
Installing the Audio Device Driver for DOS
To install the audio device driver:
 
 
  1. Start DOS.
  2. Insert the Audio Features Diskette for DOS/Windows 3.1 into the diskette drive.
  3. Type A:\INSTALL and press Enter .
 
Installing the CD-ROM Device Driver for DOS
To install the CD-ROM device driver for DOS:
 
 
  1. Start DOS.
  2. Insert the CD-ROM Driver Diskette into the diskette drive; then type A:\UINSTALL and press Enter .
  3. Select Install IBM ThinkPad CD-ROM Driver for DOS/Windows in the "Installation Options" window; then follow the instructions on the screen.
  4. After the installation is complete, remove any diskette from the diskette drive and restart the computer.
 
Hints and Tips
For details about software parameters related to the DOS CD-ROM device driver in the CONFIG.SYS file, go to Software
Parameters in CONFIG.SYS.
 
Software Parameters in CONFIG.SYS
When the CD-ROM device driver is installed in your computer, the installation program (UINSTALL.EXE) automatically modifies the CONFIG.SYS file and AUTOEXEC.BAT file. The following are the parameters for the CD-ROM device driver for CONFIG.SYS:
 
DEVICE=[drive:][path]IBMTPCD.SYS /R [/C] [/S]
 
The CD-ROM device driver is IBMTPCD.SYS. Make sure this line is inserted after the EMM386 statement.
 
[/C] Sets the cache size in the XMS memory. If this parameter is specified, the cache size in the XMS memory is 512 sectors. If it is not specified, the default is 0.
[/S] Sets the power-saving mode to OFF. If you are using DOS with another operating system (for example, with OS/2 in dual boot), set the power-saving mode to OFF using this parameter.
 
Notes:
 
 
  1. For the software parameter in the AUTOEXEC.BAT file, refer to the README in the CD-ROM Driver Diskette.
  2. If you are using DOS SMARTDRV caches and planning to use a photo CD or multisession discs, you have to add the /U parameter to the SMARTDRV line in the AUTOEXEC.BAT file, because photo CDs or multisession discs are not compatible with the SMARTDRV caches.
  3. To be able to play CD-i movies in Windows 3.1, do not cache the CD-ROM drive with SMARTDRV Version 5.0 or 5.1, which is supplied with PC DOS Version 7.0.
 


If you are unable to find what you are looking for, please do try the following options:
1. Lenovo Assisted Search
2. Product usage and general troubleshooting tips
3. Lenovo Support Forum
4. Technical Support Call Centre

Document ID : UM000569
Legacy Document ID : BMOE-3YCK6T
Last Updated :
Copyright © Lenovo 2013, all rights reserved
Was this page helpful to you?YesNo


   
Select Task
 
Drivers & Software  
Guides & Manuals  
Diagnose & Fix  
Warranty & Services  
Parts  
Accessories  

ADDITIONAL RESOURCES
Support Help Index
Technical Specifications - PSREF
Support Videos
System Information Tips
Driver Matrix
COMMUNITY
KnowledgeBase Featured Articles
Community KnowledgeBase
Community Forums
Lenovo EMC
Windows 8 Support