This package provides the following utility programs for DOS, Microsoft Windows, OS/2 (DOS screen), and Microsoft Windows NT (DOS screen) users: - ThinkPad Configuration program (setup program) for DOS - Docking Control program for DOS
This Additional Information field contains the following sections: I. Summary of changes II. Installation instructions for DOS III. Installation instructions for DOS screen under Windows NT IV. Installation instructions for OS/2 V. Determining which version is installed
I. Summary of changes version 4.22 - (New) Support for new ThinkPad system
Select Install DOS ThinkPad Configuration at the Installation Options screen; then follow the instructions on the screen.
III. Installation instructions for DOS screen under Windows NT
Install ThinkPad Configuration for Windows NT. Refer to the installation guide of Utility for Windows NT.
Login to NT with a UserID of Administrator and start MS-DOS prompt from Start menu.
Follow the same instruction as above for DOS.
IV. Installation instructions for OS/2
If ThinkPad Configuration for OS/2 program is not supported for your system, you need to install System Management device driver first. a) Open the System Setup folder in the OS/2 System folder. b) Select Device Driver Install and click the Install button. c) Click ThinkPad System Management Device Driver. Then click OK.
Open OS/2 prompt.
Type [Program Path] \INSTUTD2 and press Enter.
Follow the instructions on the screen.
V. Determining which version is installed
Open a DOS screen.
Type PS2 ?and press Enter. The version will be displayed next to Utility for DOS on the second line.