A separate package is required to enable the Ethernet function of the IBM 10/100 Ethernet Mini PCI Adapter with 56K Modem (3Com).

Click here for instructions on how to transfer files greater than 1.44 MB to multiple floppies.

• (Fix) Fix for low modem connect speeds.

Note: The driver version has been changed to reflect the correct version. All previous driver versions should be 3.xx.xxx.xxxx and not 2.xx.xxx.xxxx.

Click here for a complete list of changes fixed by this driver update.

1. With the power removed, install the modem if necessary.
2. Start Windows Me.
3. Extract the drivers onto the hard disk drive. This will make two directories:

4. Click Start, then click Run.
5. In the Open field, type C:\DRIVERS\WME\MODEM\MDMSETUP\SETUP.EXE, and click OK to start the installation process. If you extracted the files to a different location, specify that location instead.
6. Click the Next button on the Welcome dialog screen.
7. The modem will be automatically detected.
8. Select the Specify the location of the driver (Advanced) radio button on the Add New Hardware Wizard dialog screen.
9. Click the Next button on the Add New Hardware Wizard dialog screen.
10. Ensure the Specify a location box is selected.
11. Type c:\windows\options\cabs into the location box.
12. Follow the instructions on the screen to complete modem installation.
    
    

1. Start Windows Me.
2. Click Start, select Settings, then click Control Panel .
3. Open the System icon.
4. Click the Device Manager tab.
5. Click the + next to Modem.
6. Select IBM Modem (or 3Com Mini PCI 56K Modem).
7. Click the Remove button.
8. Click OK from the Confirm Device Removal dialogue box.
9. If asked to restart the machine, do so.
   
   

1. Start Windows Me.
2. Click Start, select Settings, then click Control Panel.
3. Double-click Modems.
4. Click the Diagnostics tab.
5. Select the COM port the modem is installed on.
6. Click the More Info button.
7. Scroll down to where the ATI7 command is displayed. The driver version will be displayed.