This package installs an update to the IBM OS/2 Warp device driver for the ADI SoundMax integrated digital audo system that comes preinstalled in your IBM computer.
Before you begin, please have a blank 1.44 MB diskette ready.
This update package is intended for IBM NetVista systems that come with onboard ADI SoundMAX audio.
Print this file so that you can refer to it during the installation.
Downloading the update
Click the file link to download the file from the Web page.
When prompted, select a drive and directory in which to save the downloaded file.
Extracting the update
Insert a blank 1.44MB floppy diskette into the diskette drive.
Run d70t09a.exe from the directory in which it was downloaded. The files will extract to the floppy diskette.
Installing the update
Insert the Analog SoundMax driver diskette into drive A (or any other diskette drive).
Open an IBM OS/2 full-screen or IBM OS/2 window session.
Run install.cmd for manual installation or cidinst.cmd for unattended installation.
When prompted to do so, remove the diskette from drive A, perform a shutdown, then restart your computer.
OS/2 operating system limitations ADI tests and recommends the following combinations of operating system and fixpak:
XR_M013 + Driver fixpak XR_D001
Warp 4.0 Japanese
For combinations of operating system and fixpak prior to those shown below, WarpMix does not function correctly. Although the driver its self may work with earlier versions of the operating system, we cannot guarantee this.
Warp 4.0 Japanese
WinOS/2 audio driver limitations The Analog SoundMax driver comes with a WinOS/2 audio driver that supports wave playback and recording in WinOS/2 sessions. It's not possible to use the audio device in OS/2 and WinOS/2 simultaneously. MMPM/2 or WinOS/2 will report errors if you try this.