Windows Server 2003, Windows Server 2008, Windows 7, Windows XP, Windows Vista
09 Jun 2013
This packages install BIOS update utility for Windows 32-bit.
Notice : There are two versions of BIOS images included in this package. - Version IMAGE9H.ROM is compatible with machines whose current BIOS version is 9HKT51A or lower. - Version IMAGEFA.ROM is compatible with machines whose current BIOS version is FAKT08A or higher. - The batch file will automatically detect and update the right version of BIOS image which is compatible with your machine.
ThinkServer TS130 (type 1098, 1100, 1105, 1106)
Supported Operating Systems
Windows Server 2003 R2 32bit
Windows 7 Ultimate/Professional SP1 32bit
Windows XP Professional SP3 32bit
Windows Server 2008 32bit
Windows Vista Business SP2 32bit
Downloading the package
Click the file link to download the file from the Web page.
When prompted, select a drive and directory in which to save the downloaded file.
To update the server BIOS using this package, do the following:
Please enter BIOS Setup to check your current BIOS version:
If your current BIOS is FAKTXXAUS, and if you have set the Administrator/User password in BIOS Setup, please DO clear your password first. Otherwise, ignore this step.
Do not turn off your server when updating the BIOS, otherwise the BIOS will fail to be updated and the system will fail to restart.
If your old BIOS is 9HKTXXA, you just need to run flash.sh 1 time, and system will auto reboot 1 time. When you see the successful message, the update is completed.
If your old BIOS is FAKTXXA, you just need to run flash.sh 3 times, and system will auto reboot 3 times. When you see the successful message, the update is completed.
If your old BIOS is FAKTXXB, please enter SETUP to set the "Security"->"Secure Boot"->[Secure Boot] to "Disabled" and set the "Security"->"Secure Boot"->[Secure Boot Status] to "Setup Mode" by pressing "Reset To Setup Mode",then save the setting to flash BIOS. You just need to run flash.bat 1 time, and system will auto reboot and update process will continue after reboot. When the update process shows 100%, the update is completed. Then it will auto reboot. If you want to use the secure boot function after the BIOS update , you can enter SETUP to set the "Security"->"Secure Boot"->[Secure Boot] to "Enabled" and set the "Security"->"Secure Boot"->[Secure Boot Status] to "User Mode" by pressing "Restore Factory Keys", then save and exit SETUP.
Download the package. Then, extract the package and copy to your OS.
Open a command window.
Enter the folder path and run flash.bat to flash. Wait till the process completes and follow the warning messages or refer to the above Attention contents.