Introduction to Pairing Mode for slim keyboard and mouse

The above symptom may occur on the following systems:

IdeaCentre

Keyboard LED and Pairing Mode

1. Insert dongle into USB port of host, and dongle will enter into binding mode. After 30 seconds, dongle will return to normal mode.

2. Press F2, F3 and F4 keys in the same time then power on keyboard. Keyboard will enter into pairing mode, if there is no dongle pair with keyboard, keyboard will return to normal mode after 30 seconds

3. Put the keyboard close to dongle around 30cm waiting for pairing. If keyboard pairs with dongle successfully, the LED blinking timing will change as below see Fig.1, the LED blinks 10 times.

Fig.1

Mouse LED and Pairing Mode

1. Insert dongle into USB port of host, and dongle will enter into binding mode. After 30 seconds, dongle will return to normal mode.

2. Press right, middle and left buttons in the same time then power on mouse. Mouse will enter into pairing mode, if there is no dongle pair with mouse, mouse will return to normal mode after 30 seconds. Timing chart as below:

Fig.2

3. Put the mouse close to dongle around 30cm waiting for pairing. If mouse pairs with dongle successfully, the LED blinks 10 times, the LED blinking timing will change as below

Fig.3

Mouse into Standby / Idle and Sleep Time

Active --> 1 sec --> Standby mode --> 9 sec. --> Idle mode --> 9 minutes --> Sleep mode