Choose Your Product
No Product SelectedSelect Product
Drifting mouse or system automatically wakes up from Standby - ThinkPad
The mouse pointer slowly drifts across the screen or the system resumes from Standby mode automatically.
Affected configurations
Any ThinkPad system with TrackPoint.
When the computer resumes from Standby mode automatically, it may be due to the TrackPoint drifting or if the computer is vibrated. The sensitivity of the TrackPoint can be adjusted through the TrackPoint properties.
The TrackPoint does automatic compensations to adjust the pointer sensor. During this process, the pointer moves on the screen automatically for a short time. This self-acting pointer movement can occur when a slight, steady pressure is applied to the TrackPoint pointer while the computer is powered on or while the system is running, or when readjustment is required because the temperature has exceeded its normal temperature range.

This symptom does not indicate a hardware problem. No service actions are necessary if the pointer movement stops in a short period of time. (Remove your finger from the pointer to allow it to finish calibrating.)

Additional information

Click here for additional assistance in troubleshooting TrackPoint issues.

If you are unable to find what you are looking for, please do try the following options:
1. Lenovo Assisted Search
2. Product usage and general troubleshooting tips
3. Lenovo Support Forum
4. Technical Support Call Centre

Country Availability
Document ID : HT037198
Legacy Document ID : RJJR-3N9JKT
Last Updated :
Copyright © Lenovo 2013, all rights reserved
Was this page helpful to you?YesNo

Select Task
Drivers & Software  
Guides & Manuals  
Diagnose & Fix  
Warranty & Services  

Support Help Index
Technical Specifications - PSREF
Driver Matrix
Newly Released Drivers (RSS)
KnowledgeBase Featured Articles
Community KnowledgeBase
Community Forums
Lenovo EMC
Windows 8 Support