This package detects and configures the INTEL 945GM Express and INTEL 945PMExpress Chipsets for Microsoft Windows 2000/XP/Vista.
The following systems are supported: - ThinkPad R60, R60e - ThinkPad T60, T60p - ThinkPad X60, X60s, X60 Tablet - ThinkPad Z61e, Z61m, Z61p, Z61t
Notes: - If you use the Product Recovery function shipped with your ThinkPad to restore the Windows preload environment, you do not need this package. This package is required when you install Windows operating systems without the Product Recovery function. - This program is based on the US version but, this is language independent and can be used with any language system.
(New) Updated the following device ID fs Name Strings:
Mobile Intel 945GM/PM/GMS/940GML and Intel 945GT Express Processor to DRAM Controller - 27A0
Mobile Intel 945GM/PM/GMs/940GML and Intel 945GT Express PCI Express Root Port - 27A1
Version 7.2.2.1006
(Initial release) Detect and Configure INTEL 945GM Express Chipset and INTEL 945PM Express Chipset.
Installation instructions
Install this program to reinitialize the INTEL chipset after every supplemental update to the base operating system.
Start Windows 2000/XP/Vista and logon with administrative privileges.
Close any running applications.
Double-click the driver package to extract it to your hard drive. The default location is C:\DRIVERS\WIN\INTELINF.
For Windows Vista, Click Start, select All Programs, select Accessories, then click Run... For Windows XP/2000, Click Start, then click Run... Note: For unattended installation, Run INFINST_AUTOL.EXE with the command line flags as follows: INFINST_AUTOL.EXE -a -s
Specify INFINST_AUTOL.EXE with the full path name where you extracted the package in step 3, and click OK. Example: C:\DRIVERS\WIN\INTELINF\INFINST_AUTOL.EXE
Follow the instructions on the screen.
How to extract Windows INF files prior to OS installation
For Windows Vista, Click Start, select All Programs, select Accessories, then click Run... For Windows XP/2000, Click Start, then click Run...
In the Open field, type INFINST_AUTOL.EXE -a -a -p C:\INTEL.
Click OK. The Setup Screen (INTEL Chipset Software Installation Utility) appears. Note: This stage runs the InstallShield program and does not extract the INF and CAT files.
Click Next.
Click Yes to Accept License Agreement.
Click Next at the ReadMe Information screen. The progress bar shows the extract status. After reaching 100%, the INF and CAT files have been extracted in the C:\INTEL folder.
Check the C:\INTEL folder. Some folders should be in C:\INTEL.
The INF and CAT files can be used from the Win2000/XP/Vista folders for installation.
Use the C:\INTEL subdirectory.
Installing the Windows 2000/XP/Vista INF files prior to OS installation
Create the following directory structure under the Windows Setup Directory: \$OEM$\$$\INF
Copy the Windows INF files from the the following folder to the directory created in Step 1.
Windows 2000: C:\INTEL\Win2000
Windows XP: C:\INTEL\XP
Windows Vista: C:\INTEL\Vista
Create the following directory structure under the Windows Setup Directory: \$OEM$\$1\drivers\IntelINF
Copy the Windows INF files and the catalog files (.CAT) from the folder listed in step 2 to the directory created in Step 3 above.
Either modify the default Windows installation answer file, Unattended.txt, located in the Windows Setup Directory, or create a customized answer file. The answer file must include the following information: [Unattended] OemPreinstall = Yes OemPnPDriversPath="drivers\IntelINF"
Run WINNT.EXE /u:answer file name /s:windows setup directory to install Windows.
Cart
