Battery pack removal and installation - ThinkPad T40, T40p, T41, T41p, T42, T42p, T43, T43p
View battery removal movie
View battery installation movie

  1. Turn off the computer, or enter hibernation mode. Then disconnect the AC adapter and all cables from the computer.
    Note: If you are using a PC Card, the computer may not be able to enter hibernation mode. If this happens, turn off the computer.
  2. Close the computer display, and turn the computer over.
  3. There are two battery latches. First unlock the one above the battery by sliding it to the left (1). Then unlock the one to the left of the battery by sliding it to the left (2). Finally, holding the second latch in the unlocked position, remove the battery (3).
    Note: Some models have only one battery latch, which is to the left of the battery.
    Remove battery
  4. Install a fully charged battery.
    Install charged battery
  5. Slide the battery latches to the locked position.
    Slide the battery latches
  6. Turn the computer over again. Connect the AC adapter and the cables to the computer.


Purchase parts online

If you are unable to find what you are looking for, please do try the following options:
1. Lenovo Assisted Search
2. Product usage and general troubleshooting tips
3. Lenovo Support Forum
4. Technical Support Call Centre

Country Availability
Document ID : PD012452
Legacy Document ID : MIGR-46510
Last Updated :
Copyright © Lenovo 2013, all rights reserved
Was this page helpful to you?YesNo

Select Task
Drivers & Software  
Guides & Manuals  
Diagnose & Fix  
Warranty & Services  

Driver Matrix
KnowledgeBase Featured Articles
Community KnowledgeBase
Community Forums