Processor removal - NetVista 2289, 6824
  1. Turn off the computer and peripheral devices and disconnect all external cables
    and power cords
  2. Remove the cover. See Cover removal.
  3. Press down and back on the silver tab holding the fansink in place to release it
    and pivot the retaining bar off of the fansink notches.
  4. To remove the fansink from the processor, twist the fansink to break the seal
    formed by the thermal grease and remove.

    Note:
    If the thermal grease seal cannot be broken, you may want to start up
    the system to heat the processor and loosen the thermal grease.

    removing the processor

  5. Pull out and lift up the processor socket lever arm upward to its maximum
    vertical position to release the processor.
  6. Lift the processor out of the system board.

    Note:
    When you install the new processor, make sure to reinstall the fansink to
    insure proper cooling.
Purchase parts online


If you are unable to find what you are looking for, please do try the following options:
1. Lenovo Assisted Search
2. Product usage and general troubleshooting tips
3. Lenovo Support Forum
4. Technical Support Call Centre

Country Availability
AvailableWorldwide
Document ID : PD013482
Legacy Document ID : MIGR-42955
Last Updated :
Copyright © Lenovo 2013, all rights reserved
Was this page helpful to you?YesNo


   
Select Task
 
Drivers & Software  
Guides & Manuals  
Diagnose & Fix  
Warranty & Services  
Parts  
Accessories  

ADDITIONAL RESOURCES
Driver Matrix
COMMUNITY
KnowledgeBase Featured Articles
Community KnowledgeBase
Community Forums