Top cover removal and installation - NetVista 8301

These instructions are also available in movie format:

  1. Turn off the computer and peripheral devices and disconnect all external cables and power cords.
  2. Unlock and remove the hard disk drive.
  3. Remove the front bezel by detaching from the right side and lifting it off.

    remove front plate
  4. Remove the 2 front and 2 back screws holding the cover in place.
  5. Slide the top cover toward the front of the box and lift off.

    remove top cover

 

Installing the top cover

  1. Place the lid on the computer and slide toward the rear.

    Installing top cover
  2. Replace the two front and two back screws which hold the cover in place.
  3. Replace the bezel.
  4. Reconnect the external cables and power cords to the computer.
  5. To update the configuration, see "Setup Utility program".

 

Purchase parts online


If you are unable to find what you are looking for, please do try the following options:
1. Lenovo Assisted Search
2. Product usage and general troubleshooting tips
3. Lenovo Support Forum
4. Technical Support Call Centre

Country Availability
AvailableWorldwide
Document ID : PD009724
Legacy Document ID : MIGR-42843
Last Updated :
Copyright © Lenovo 2013, all rights reserved
Was this page helpful to you?YesNo


   
Select Task
 
Drivers & Software  
Guides & Manuals  
Diagnose & Fix  
Warranty & Services  
Parts  
Accessories  

ADDITIONAL RESOURCES
Driver Matrix
COMMUNITY
KnowledgeBase Featured Articles
Community KnowledgeBase
Community Forums