Beep and No beep symptoms - ThinkPad X200, X200s
 |
|
|
|
|
|
| One beep and a blank, unreadable, or flashing LCD. | - Reseat the LCD connector.
- LCD assembly.
- External CRT.
- System board.
| | One long and two short beeps, and a blank or unreadable LCD. | - System board.
- LCD assembly.
- DIMM.
| | Two short beeps with error codes. | Click here to diagnose the error code | | Two short beeps and a blank screen. | - System board.
- DIMM.
| | Three short beeps, pause, three more short beeps, and one short beep. | - DIMM.
- System board
| | One short beep, pause, three short beeps, pause, three more short beeps, and one short beep. | | Only the cursor appears. | Reinstall the operating system. | | Four cycles of four short beeps and a blank screen. | System board (security chip) | | Five short beeps and a blank screen. | System board |
|
|
| No beep, power-on indicator on, LCD blank, and no POST. | - Make sure that every connector is connected tightly and correctly.
- DIMM.
- System board.
| | No beep, power-on indicator on, and LCD blank during POST. | - Reseat DIMM.
- System board.
| | The power-on password prompt appears. | - A power-on password or a supervisor password is set. Type the password and press Enter.
| | The hard drive password prompt appears. | - A hard drive password is set. Type the password and press Enter.
|
|
|
|
|
|
If you are unable to find what you are looking for, please do try the following options:
1.
Lenovo Assisted Search 2.
Product usage and general troubleshooting tips 3.
Lenovo Support Forum 4.
Technical Support Call Centre
| Country Availability |
| Available | Worldwide
|
Document ID
: HT002036
Legacy Document ID
: MIGR-73948
Last Updated
:
Copyright © Lenovo 2013, all rights reserved
Cart
Loading... Please Wait...
