Choose Your Product
No Product SelectedSelect Product
Intel SATA Controller AHCI Driver for Windows 7 (32-bit), XP - Notebook

This package installs the software (Intel Chipset driver) to enable the following devices:

  • Intel (R) 7 Series Chipset Family SATA AHCI Controller

Note:

  • If this package has been installed, updating (overwrite-installing) this package will fix problems, add new functions, or expand functions as noted below.
  • This program is language independent and can be used with any language system.

 

Contents
Supported Systems
Supported Operating System
Summary of changes
Installation Instructions
Determining which version is installed

 

Supported Systems
  • Lenovo B480, B490, B580, B590, V480, V480c, V480s, V580, V580c, M490, E49
  • Edge E330, Edge L330
  • Zhaoyang K29, K49, E49

Supported Operating System
  • Microsoft Windows 7 32-bit
  • Microsoft Windows XP
Summary of Changes

Where:

  • < > Package version numbers
  • [Important] Important update
  • (New) New function or enhancement
  • (Fix) Correction to existing function

Version 11.2.0.1006

  • (Fix) Fixed an issue where BSOD occurs on Intel VGA configuration.

Version 11.0.0.1032

  • (New) Added support for Microsoft Windows XP for ThinkPad Edge E330.
  • (New) Added support for Lenovo V480s.
  • (New) Added support for ThinkPad Edge L330
  • (New) Added support Microsoft Windows 7 for ThinkPad Edge E330
  • (New) Added support Microsoft Windows XP for Lenovo E49, Zhaoyang K29, K49, E49
  • (New) Added support Microsoft Windows XP for Lenovo V480, V580, B480, B580.
  • (New) Added support for Lenovo E49, Zhaoyang K29, K49, E49
  • (New) Initial release for Lenovo V480, V580, B480, B580

Note:
Please refer to the README file under the "File details" section for a complete list of changes fixed by this driver update.

 

Installation Instructions

Notes:

  • If your computer runs satisfactorily now, it may not be necessary to update the software. To determine if you should update the software, refer to the Determining Which Version is Installed section.
Manual Install

This section assumes to use Internet Explorer and Windows Explorer.

[Downloading file]

  1. Click once on the underlined file name. Once this is done, some pop-up windows will appear.
  2. Follow the instructions on the screen.
  3. In the window to choose Run or Save, click the Save button.
  4. Choose the folder you would like to download the file to and click the Save button. A different window will appear and the download will begin and complete. Once the download has completed, there may or may not be a message stating that the download completed successfully.

 

Clean Install

[Window 7 32-bit]

  1. Start Windows 7 and logon with an administrative privileges.
  2. Click Start, then click Control Panel.
  3. Click System and Maintenance, then click System.
  4. Click Device Manager.
  5. Expand the IDE ATA/ATAPI controllers category.
  6. Right-click Standard AHCI 1.0 Serial ATA Controller and then select Update Driver Software...
  7. Click Browse my computer for driver software.
  8. Click Browse..., then select the driver location and then click Next.
  9. Click Close when the installation has completed.
  10. Click Yes to restart the computer.
Update Install

To update the driver, follow the instructions below:

[Windows 7 32-bit]

Note: This is for administrator use only.

  1. Start Windows 7 and logon with an administrative privileges.
  2. Click Start, then click Control Panel.
  3. Click System and Maintenance, then click System.
  4. Click Device Manager.
  5. . Expand the IDE ATA/ATAPI controllers category.
  6. Right-click
    Intel(R) 5 Series 4 Port SATA AHCI Controller or
    Intel(R) 5 Series 6 Port SATA AHCI Controller or
    Intel(R) 5 Series/3400 Series SATA AHCI Controller
    or
    Intel(R) 7 Series Chipset Family SATA AHCI Controller or
    Intel(R) 7 Series/C216 Chipset Family SATA AHCI Controller or
    Intel(R) Desktop/Workstation/Server Express Chipset SATA AHCI Controller or
    Intel(R) ICH10D/DO SATA AHCI Controller or
    Intel(R) ICH10R SATA AHCI Controller or
    Intel(R) ICH7M/MDH SATA AHCI Controller or
    Intel(R) ICH7R/DH SATA AHCI Controller or
    Intel(R) ICH9M-E/M SATA AHCI Controller or
    Inter(R) Mobile Express Chipset SATA AHCI Controller
    and then select Update Driver Software...
  7. Click Browse my computer for driver software.
  8. Click Browse..., then select the driver location and then click Next.
  9. Click Close when the installation has completed.
  10. Click Yes to restart the computer.
Determining which version is installed
  1. Click Start, then click Control Panel.
  2. Click System and Security, then click System.
  3. Click Device Manager.
  4. Click the + sign in front of the IDE ATA/ATAPI controllers.
  5. Double-click Intel(R) 7 Series Chipset Family SATA AHCI Controller.
  6. Click the Driver tab. Then you will see the Driver Version.
NameOperating SystemVersionReleasedAdd to
download list
Download
now
Intel SATA Controller AHCI Driver
h1is07ww.exe
530.91 MB
11.2.0.100604 Dec 2012
README for Intel SATA Controller AHCI Driver
h1is07ww.txt
11.51 KB
11.2.0.100604 Dec 2012


If you are unable to find what you are looking for, please do try the following options:
1. Lenovo Assisted Search
2. Product usage and general troubleshooting tips
3. Lenovo Support Forum
4. Technical Support Call Centre

Country Availability
AvailableWorldwide
Document ID : DS029308
Last Updated :
Copyright © Lenovo 2013, all rights reserved
Was this page helpful to you?YesNo


   
Select Task
 
Drivers & Software  
Guides & Manuals  
Diagnose & Fix  
Warranty & Services  
Parts  
Accessories  

DRIVER RESOURCES
Support Help Index
Driver Matrix
Drivers for LenovoEMC Storage
Newly Released Drivers (RSS)
Update your THINK product
ThinkVantage Tools
Solutions Center
Assisted Search
Popular Solutions
Microsoft Solutions
Self-Diagnose Tool
Community
KnowledgeBase Featured Articles
Community KnowledgeBase
Community Forums
Lenovo EMC
Windows 8 Support