Verify that the latest BIOS and Embedded Controller when available for the ThinkPad system have been installed. Note: Not all ThinkPad systems require a separate Embedded Controller utility.
Adjust the power management settings according to your preferences and environment.
Click Start -> Programs -> ThinkVantage -> ThinkVantage Power Manager
Same as XP or go to Control Panel -> Lenovo-Power Controls
3.Verify the health of the system battery.
Click the Battery Gauge Icon on the taskbar and then click Launch Power Manager.... The Power Scheme window will appear. Note: The screenshots and steps outlined may be different depending on the version you are running of Battery Maximiser or Power Manager.
Click the Battery Information tab to view the condition of the battery.
Status of the battery:
Green means good condition
Red means the battery needs to be replaced. ThinkPad system batteries typically have a maximum warranty of one year. Note: If your battery needs to be replaced, then see the Need more help? section below to contact the Support Center or buy a replacement.
Remaining time is calculated based on the current remaining capacity divided by the average current battery consumption (wattage). Depending on the current battery wattage consumption, remaining time calculated can change. For example, with the system running at the Maximum Performance setting for the processor, the system consumes more battery power, so the remaining time is shorter. A good analogy would be driving a car. When you drive faster, you use more gasoline; slower uses less. If you speed up and slow down frequently, it is more difficult to estimate how much driving time you have left.
The Power scheme settings can also be adjusted to improve battery life and performance.
Disable any screen savers in the operating system.
Right-click on the desktop background of the Microsoft operating system and then click Properties. The Display Properties window will be displayed.
Click the Screen Saver tab.
Select None from the pull-down list and then click OK.
Windows 7 a. Right-click on the desktop background and then click Personalize. b. Click on the Screen Save icon. c. Select None from the pull-down list and then click OK
Scan all the files on the system with AntiVirus software using the vendor's latest virus definitions.
Scan the system for spyware using the anti-spyware software's latest definitions. Perform a Web search for spyware software for more information.
Verify the driver and firmware versions are the latest for attached hardware. This can be verified at the manufacturer's Web site, if available.
Remove any attached hardware and device drivers. For testing purposes, temporarily disconnect any devices one at a time. Ensure all attached hardware is Advanced Power Management (APM) or Advanced Configuration and Power Interface (ACPI) compliant. This can be verified in the hardware device User's Guide from the manufacturer.
Load the original or an earlier configuration. Remove any attached hardware and device drivers. For testing purposes, temporarily disconnect any device one at a time. Ensure all attached hardware Advance Configuration and Power Interface (ACPI) compliant. This can be verified in the hardware device User's Guide from the manufacturer.
Load the original configuration in the BIOS.
Turn on the computer.
While the "Press F1 for BIOS Setup Utility or the blue ThinkVantage button,the BIOS Setup Utility menu will be displayed. If a password prompt appears, type the correct password.
Press the F9 key and then select Yes to load the default configuration.
Press the F10 key and then select Yes to save the configuration changes and exit