Parts information

At a glance

Warranty

3 year Limited - customer carry-in exchange

Packaging

You will receive one box containing the following items:

• 128MB or 1GB PC3200 CL3 Non-Parity DDR SDRAM UDIMM Memory
• Publications

Product dates

Worldwide

• Announce date: 11 May 2004
• Planned availability date: 11 May 2004
• Effective withdrawal date: 23 Aug 2005 (128MB only)

Technical specifications

Performance specifications as known at time of announcement

• PC3200 DDR SDRAM Memory Upgrade -- The 3200 is a figure derived from twice the memory-side bus clock frequency (200 MHz x 2; data transfers can occur on both edges of the clock) times the module data width (64 bits / 8 bits/byte = 8 bytes) = 3,200. This is the maximum data rate; the units are MBps.
• Column Address Strobe (CAS) Latency (CL) of 3 (memory bus clock cycles).
• Non-parity mode organized as 32M x 64, and 64M x 64 respectively.
• Serial presence detect.
• 184-pin JEDEC/EIA standard UDIMM interface.
• Gold-plated leads.

Physical, environmental, and compatibility specifications as known at time of announcement

Height

• inches: .15
• mm: 3.8

• inches: 5.25
• mm: 133.4

• inches: 1.38
• mm: 35.7

Operating temperature

• between 0 degrees Celsius and 65 degrees Celsius
• between 32 degrees Fahrenheit and 149 degrees Fahrenheit

Relative humidity

• Operating: between 10% and 90%

Hardware compatibility

The 128MB and 1GB PC3200 CL3 Non-Parity DDR SDRAM UDIMM memory upgrades supports the following systems:

* 800MHz front side bus machines

Installation time

Approximately five minutes.