|
| Feature | Specification |
|---|
| Monitor size | 23.6-inch Wide (599 mm) | | Viewable image size | 23.6-inch (599 mm) | | Maximum viewable area (W x H) | 521.3 x 293.2mm | | Contrast ratio (typical) | 1000 : 1 | | Brightness (typical) | 300 cd/m2 | | Aspect Ratio | 16 : 9 | | Pixel pitch | 0.272 mm | | Colors | 16.7 million | | Viewing angle (typical) | Horizontal: 170 degrees (at 10:1 contrast ratio) | | Vertical: 160 degrees (at 10:1 contrast ratio) | | Response time (typical) | 5 ms (MPRT<10ms) | | Video input | VGA Analog, HDMI 1.3 | | Signal cable - 15-pin D | 1.8 m | | Signal cable - HDMI1.3 | 1.8 m | | Audio cable | 1.8 m | | USB cable | 1.8 m | | SYNC Type | Separate TTL | | SYNC on Green | No | | USB input | 1 | | USB output | 4 | | Bezel width (Side) | 20.4 mm | | Tilt | 10-60 degrees backward | | Swivel | None | | Lift | None | | Pivot | None | | Soundbar Attachment | None | | VESA mount | 100 x 100 mm | | Kensington Security Lock Slot (www.lenovo.com/support/security) | Yes | | Lockable controls | Yes | | OSD | Yes | | OSD languages | 8 | | Preset display modes | 26(VGA), 24(HDMI) | | User-defined display modes | 20 | | VESA DDC capable | 2B/CI | | Power supply | External power adapter | | Power cord - detached | 1.8 m | | ISO 9241-307 compliant | No | | ENERGY STAR 5.0 | Yes | | VESA DPMS power management capable | Yes | | JEIDA compliance (AP) | Yes | | FCC B compliance | Yes | | TCO5.0 Environmental Label | Yes | | MPR-2 Emission compliance | Yes | | EU Directive 2002/95/EC (RoHS) | Yes | | EU Directive 2002/96/EC (WEEE) | Yes | | China RoHS | Yes | | CCC | Yes | | China Monitor Energy Efficiency Standard Tier 2 | Yes |
|
|
|
| Parameter | Unpacked | Packed |
|---|
| Width | 22.40 inch (569.0 mm) | 27.48 inch (698 mm) | | Depth | 6.57 inch (167.0 mm) | 7.24 inch (184 mm) | | Height | 16.69 inch (423.8 mm) | 22.71 inch (577 mm) | | Weight | 18.00 lb (8.2 kg) | 23.37 lb (10.6 kg) | | Weight - without tilt stand | 17.86 lb (8.1 kg) | - - - - - - - - - - - |
|
|
|
- Input voltage: 90 to 264 V ac
- Frequency: 47-63 Hz
- Power consumption:
- Maximum: 65 watts
- Typical: 27 watts typical*
- VESA standby: <1 watts
- VESA suspend: <1 watts
- VESA off: < 1 watts
- Maximum earth leakage current:
- Terminal — PE (Protective Earth)
Maximum 3.5 mA at 90V-264 V - Terminal — (Accessible parts and circuits not connected to protective earth)
Maximum 0.25 ma at 90V-264 V
* Typical power consumption is tested under ENERGY STAR 5.0 standard.
|
|
|
| Parameter | Temperature | Relative humidity | Altitude |
|---|
| Operating | 0 to 45 deg. C | 8 to 80 % | 0 to 8,000 ft (2,438 m) | | Shipping | -20 to 60 deg. C | 5 to 95 % | 0 to 40,000 ft (12,192 m) | | Storage | -20 to 60 deg. C | 5 to 95 % | 0 to 40,000 ft (12,192 m) |
|
|
|
Declared acoustical noise emissions LWAU = 4.5 bels or less. The noise emission level stated is the declared (upper limit) A-weighted sound power level, in bels, for a random sample of monitors. All measurements are made in accordance with ANSI S12.10 and reported in conformance with ISO/DIS 7779. |
|
|
- One monitor
- Attached foldable tilt stand
- Attached 1.8-meter (5.9-feet) analog video signal cable (15-pin D to 15-pin D)
- Detached 1.8-meter (5.9-feet) digital (HDMI to HDMI) cable
- Detached 1.8-meter (5.9-feet) Audio cable
- Detached 1.8-meter (5.9-feet) USB cable
- Power cord
- A 3 -> 2 pin AC adapter (Japan only)
- A Japanese proof of purchase card (Japan only)
- A CD containing multilingual user's guide, setup test pattern, and Windows installation file
- Setup poster
- Safety, troubleshooting, and warranty information
Note: With the exception of the models for U.S., Canada, and Japan, the power cords (based on the country order code) are supplied by distribution centers.
|
|
|
Three years - Customer Carry-in or Mail-in using Rapid Replacement Service - Announce date: 05 Jan 2010 (Worldwide)
- Availability date: 05 Feb 2010 (Asia Pacific, Europe/Middle East/Africa)
- Availability date: 12 Mar 2010 (Canada, Latin America, United States)
|
|
The display is intended to operate with system units or video adapters that generate a video output signal falling within the following specification: |
| Maximum resolution | 1920 x 1080 pixels | | Optimum resolution | 1920 x 1080 pixels | | Maximum pixel rate | 205 MHz(VGA) 165 MHz (HDMI) |
The monitor supports VESA Standard Timings as detailed in "Display Monitor Timing Specification," Version 1.0, Revision 0.8, dated September 17, 1998, for the following modes: - VGA: 640 x 480 at 60, 72 and 75 Hz
- SVGA: 800 x 600 at 56, 60, 72 and 75 Hz
- XGA: 1024 x 768 at 60, 70, 75 Hz
- SXGA
- 1280 x 1024 at 60, 70, and 75 Hz
- 1440 x 900 at 60 and 75 Hz
This monitor also supports the following modes: - 640 x 350 at 70 Hz
- 832 x 624 at 75 Hz
- 1152 x 864 at 75 Hz
- 1366 x 768 at 60 Hz
- 1680 x 1050 at 60 Hz
- 1920 x 1080 at 50 and 60 Hz
Note: National language support is a function of the video adapter in the system unit and the application or support software. |
Addressability
(H x V Pixels) | Incoming video refresh rate |
|---|
| NTSC | 60 Hz | | PAL | 50 Hz | | 640 x 350 | 70 Hz | | 640 x 480 | 60 Hz | | 72 Hz | | 75 Hz | | 800 x 600 | 56 Hz | | 60 Hz | | 72 Hz | | 75 Hz | | 832 x 624 | 75 Hz | | 1024 x 768 | 60 Hz | | 70 Hz | | 75 Hz | | 1152 x 864 | 75 Hz | | 1280 x 1024 | 60 Hz | | 70 Hz | | 75 Hz | | 1366 X 768 | 60 Hz | | 1440 x 900 | 60 Hz | | 75 Hz | | 1680 x 1050 | 60 Hz | | 1920 x 1080 | 50 Hz | | 1920 x 1080 | 60 Hz (Optimum Display Mode) |
|
|
|
Addressability
(H x V Pixels) | Incoming video refresh rate |
|---|
| NTSC | 60 Hz | | PAL | 50 Hz | | 640 x 350 | 70 Hz | | 640 x 480 | 60 Hz | | 72 Hz | | 75 Hz | | 800 x 600 | 56 Hz | | 60 Hz | | 75 Hz | | 832 x 624 | 75 Hz | | 1024 x 768 | 60 Hz | | 70 Hz | | 75 Hz | | 1152 x 864 | 75 Hz | | 1280 x 1024 | 60 Hz | | 70 Hz | | 75 Hz | | 1366 X 768 | 60 Hz | | 1440 x 900 | 60 Hz | | 75 Hz | | 1680 x 1050 | 60 Hz | | 1920 x 1080 | 60 Hz (Optimum Display Mode) |
|
|
The factory-preset modes cannot be overwritten, but can be adjusted to personal choice. The new settings are stored automatically in one of the user locations and are recalled each time that mode is used. The factory settings for the mode in use, if any, can be restored by operating the reset control. Information about the current incoming display mode is shown in the on-screen displays. However, it is displayed at the LCD panel's optimum refresh rate of 60 Hz. It may be necessary to make some adjustments to the displayed image to compensate for variations in video signal timings. The user controls can be used to make these adjustments. Compatibility
The Lenovo L2461x Wide monitor is supplied with detachable 1.8-meter (5.9-feet) video (15-pin D) and 1.8-meter USB cables, and 1.8-meter attached digital cable (HDMI to HDMI). This monitor has been tested with ThinkCentre and ThinkPad systems and is compatible with systems and graphics adapters that comply with the relevant parts of "VESA and industry standards and guidelines for computer display monitor timing" Version 1.0 Revision 0.8, adopted September 17, 1998. Supported display modes and number of colors are a function of the attaching system unit. The full range of display modes, refresh rates, and number of colors available with this monitor may not be available or supported with all combinations of system units, their operating systems, and application software. Implementation of monitor Plug and Play follows the VESA DDC standard. This standard must also be implemented in the attaching system unit hardware and software to be effective.
|
- Windows 7
- Windows Vista
- Windows XP
|
|
|
- Ergonomics:
- CSC
- Eco-Mark
- ENERGY STAR 5.0
- eStandby (Korean)
- MPR 2
- TCO Displays 5.0
- Software: Microsoft Windows 7/Vista/XP
- EU Directive 2002/96/EC - WEEE
- EU Directive 2002/95/EC - RoHS
- China RoHS
- REACH
- EuP
- Standard: COMMISSION REGULATION (EC) No 1275/2008 (ANNEX I point 2 for ITE product)
|
|
|
- Safety:
- Australian
- BELLIS (Belarus)
- BSMI (Taiwan)
- CCC (China)
- CE (Europe)
- CSM (Bulgaria)
- cULus+ICES (USA/Canada)
- KC (Korea)
- Gost (Russia)
- IEC950 CB Report
- JEITA (Japan)
- Jordan
- KEBS (Kenya)
- KONCAR(Croatia )
- KVALITET (Serbia)
- NEMKO (Nordic)
- NewZealand
- NOM (Mexico)
- OTAN (Kazakhstan )
- PSB (Singapore)
- PSE(Japan)
- SASO (Saudi)
- SII (Israel )
- SONCAP (Nigeria)
- TUV bauart (Germany)
- TUV-S(Argentina)
- EMI:
- Australian
- BSMI (Taiwan)
- CCC (China)
- CE (Europe) DoC
- FCC B (USA) DoC
- IC (Canada)
- MIC (Korean)
- New Zealand
- SABS(South Africa)
- VCCI (Japan)
|
|
|
- Supported display modes are a function of the attaching system unit and video subsystem. The full range of display modes available with these monitors may not be available or supported with all combinations of system units, their operating systems, video adapter cards, and application software.
- Horizontal- and vertical-synchronization signal timings are critical in order to achieve acceptable screen images. As a consequence, support for all possible variations in H- and V-sync timings for any display mode cannot be assumed.
- Adjustment of the user controls to enlarge the image to its maximum size requires that the signal timings of the display mode being used fall within the monitor-timing specifications.
- The number of colors shown in any display mode will exceed 16 million and dependent on the capabilities of the video adapter in the system unit.
- The Lenovo L2461x Wide provides FCC class B - residential installation - compliance in all display modes.
- Implementation of monitor power management follows the VESA DPMS standard. This standard must also be implemented in the attaching system unit hardware and software for monitor power management to be effective. The system implementation must provide user-adjustable, power-down delay periods. The monitor power management function is invoked only after appropriate signals are received from an attached system unit or video adapter.
- Implementation of monitor Plug and Play follows the VESA DDC standard. This standard must also be implemented in the attaching system unit hardware and software for monitor Plug and Play to be effective.
- Certain functions require the system unit to be similarly configured, so all monitor functions may not be enabled when attached to a particular system unit.
- Use of 50% gray background is not recommended since some users may experience undesirable FOS effects.
|
|
|
Loading... Please Wait...
