This package provides the update utility of the following Intel Management Engine software.

• Management Engine Firmware

	Supported ThinkPad Systems
	Supported Operating Systems
	Summary of Changes
	Installation Instructions
	Determining which Version is Installed

Supported ThinkPad systems:

• T410, T410i, T410s, T410si
• T510, T510i
• W510
• W701(*1), W701ds(*1)
• X201, X201i, X201s(*1), X201 Tablet

Note: *1: Does not support Windows 8.

• Microsoft Windows 8 32-bit, 64-bit
• Microsoft Windows 7 32-bit, 64-bit
• Microsoft Windows Vista 32-bit, 64-bit
• Microsoft Windows XP Professional x64 Edition SP2
• Microsoft Windows XP Professional SP3
• Microsoft Windows XP Tablet PC Edition 2005 SP2, SP3

Where:

• [Important] Important update
• (New) New function or enhancement
• (Fix) Correction to existing function

Version 6.2.50.1062

• (Fix) Fixed an issue under specific circumstances via specialized Intel ME and LAN driver synchronization.
• (Fix) Fixed an error in MEBx.
• (Fix) Fixed a issue of AMT publik key certificate.

Version 6.2.20.1040

• (New) Changed the software name from "Intel AMT 6.2 Management Engine Firmware"
  to "Intel Management Engine Firmware 6.2".
• (New) Added support for Microsoft Windows 8.
• (New) Support for the disabling feature of Wireless LAN Controller Link.

Version 6.2.20.1035

• (New) Enhanced some security functions.

Version 6.2.0.1027

• [Important] Enhanced several security functions.
• (New) Added support for AMT Wireless LAN event log in Firmware Event Log for increased debug and event logging capabilities.

Version 6.2.0.1022

• (New) Host Based Configuration.

Note:
Please refer to the README file under the "File details" section for a complete list of changes fixed by this driver update.

Notes:

• If your computer runs satisfactorily now, it may not be necessary to update the software. To determine if you should update the software, refer to the Determining Which Version is Installed section.
• You may need to confirm with your IT administrator if you need to update Management Engine Firmware.
• Before updating Management Engine Firmware, make sure to connect an AC power and fully charged battery pack to your system.
• You cannot down grade Management Engine Firmware version to any older version.

This section assumes to use Internet Explorer and Windows Explorer.

[Downloading file]

1. Click once on the underlined file name. Once this is done, some pop-up windows will appear.
2. Follow the instructions on the screen.
3. In the window to choose Run or Save, click the Save button.
4. Choose the folder you would like to download the file to and click the Save button. A different window will appear and the download will begin and complete. Once the download has completed, there may or may not be a message stating that the download completed successfully.

[Extracting file]

5. Make sure to be logged on with administrative account.
6. Locate the directory where the file was downloaded.
7. Locate the file that was downloaded and double-click it.
8. Follow the instructions on the screen.
9. In the "Select Destination Location" window, click Next. If you would like to select a different folder, click Browse.
10. In the "Ready to Install" window, click Install. All the necessary files will be extracted to the folder selected in the step 9.

[Installing files]

11. Open a Command Prompt with the following steps.
    [Windows 8]
    1. Hold down the Windows logo key and press X to open a menu at the
       lower-left area of the screen.
    2. Select Command Prompt (Admin) from the menu, and click "Yes".
    [Windows 7/Vista]
    1. Click Start, click All Programs, and then click Accessories.
    2. Right-click Command Prompt, and select Run as administrator.
    3. Click Yes (Windows 7) or Continue (Windows Vista).
    [Windows XP]
    1. Click Start, and click All Programs, and then click Accessories.
    2. Click Command Prompt.
12. In the Command Prompt, type the following command and press Enter. [Path where the files were extracted]\MEUPDATE.CMD
    Example: C:\DRIVERS\WIN\ME\MEUPDATE.CMD
13. Read the notice on the display, and press Enter.
    Wait for about 3 minute until the message "Update finished successfully" is displayed.
14. Close the Command Prompt window, and then shut down the computer.

Finally delete the file saved in the step 4.

To check the version of software, please perform the following steps:

1. Make sure to be logged on with an administrator account.
2. Refer to the "Manual Update" section, and download and extract the file.
3. Open a Command Prompt with the following steps.
   [Windows 8]
   1. Hold down the Windows logo key and press X to open a menu at the
      lower-left area of the screen.
   2. Select Command Prompt (Admin) from the menu, and click "Yes".
   [Windows 7/Vista]
   1. Click Start, click All Programs, and then click Accessories.
   2. Right-click Command Prompt, and select Run as administrator.
   3. Click Yes (Windows 7) or Continue (Windows Vista).
   [Windows XP]
   1. Click Start, and click All Programs, and then click Accessories.
   2. Click Command Prompt.
4. In the Command Prompt, type the following command and press Enter.
   [Path where the files were extracted]\MEInfoWin.exe
   Example: C:\DRIVERS\WIN\ME\MEInfoWin.exe
   The following information will be displayed.
   
   Example:
   
   Intel® MEInfo Version: 6.2.0.1022
   Copyright(C) 2005-2010, Intel Corporation. All rights reserved.
   
   Intel® Manageability and Security Application code versions:
   BIOS Version: 6XXXXXWW (X.XX )
   MEBx Version: 6.1.0.5
   Gbe Version: 4.16.0
   VendorID: 8086
   PCH Version: 400006
   FW Version: 6.2.0.1022 <---
   UNS Version: 6.2.0.1017
   LMS Version: 6.2.0.1017
   MEI Driver Version: 6.0.0.1179
   Wireless Hardware Version: 1.1.76
   Wireless Driver Version: 13.4.0.9
5. Note "FW Version", and refer to the Determining Which Version is Installed section to check the installed version.
   
   If you see any errors, check Device Manager to see if the following device drivers are installed on the system:
   
   System devices
   Intel® Management Engine Interface
   
   If not installed, install using the following packages:
   Intel Management Engine Interface 6.2 and Serial Over LAN (SOL) Driver.