Choose Your Product
No Product SelectedSelect Product
Cannot completely disable Intel® Active Management Technology DHCP feature when disabling AMT in BIOS - ThinkCentre M58, M58p

For the M58/M58p machine, the AMT by default will enable DHCP, so that before it boots up into the operating system, it will get an IP address from the DHCP server. When disabling AMT in system BIOS cannot completely disable the AMT DHCP features.

Affected configurations

Any of the following systems but not limited to the following systems:

  • ThinkCentre M58 (all models)
  • ThinkCentre M58p (all models)

Applies to:

  • All Operating Systems

The user must enter the AMT (press Ctrl p) to disable the DHCP first, then disable the AMT in BIOS.

Click here to view the instructions


Completely disable AMT - The only way to do this is physically sit at the PC, go into the AMT menu and set the AMT options to "none". There is no way to do this remotely because of AMT security considerations.

If you are unable to find what you are looking for, please do try the following options:
1. Lenovo Assisted Search
2. Product usage and general troubleshooting tips
3. Lenovo Support Forum
4. Technical Support Call Centre

Country Availability
Document ID : HT002445
Legacy Document ID : SF10-D0098
Last Updated :
Copyright © Lenovo 2013, all rights reserved
Was this page helpful to you?YesNo

Select Task
Drivers & Software  
Guides & Manuals  
Diagnose & Fix  
Warranty & Services  

Support Help Index
Technical Specifications - PSREF
Driver Matrix
Newly Released Drivers (RSS)
KnowledgeBase Featured Articles
Community KnowledgeBase
Community Forums
Lenovo EMC
Windows 8 Support