Screen mode fails to change back to the clone mode after disconnecting the CRT and DVI monitors - ThinkCentre A51, A51p, M51
|The screen mode fails to change back to the clone mode after disconnecting the CRT and DVI monitors and then reconnecting them.|
All of the following systems running Microsoft Windows 2000 or Windows XP, configured with a DDC monitor and the 128MB ATI X600 Pro PCI-e video adapter:
None. Hardware should not be replaced for this issue.
- ThinkCentre A51 (type 8122, 8123, 8124, 8129, 8131, 8132, 8133, 8134, 8135, 8136, 8137, 8138, 8424, 8425, 9212)
- ThinkCentre A51p (type 8420, 8421, 8422, 8423, 8427)
- ThinkCentre M51 (type 8141, 8142, 8143, 8144, 8145, 8146)
This is a limitation of the ATI X600 Pro. Hot-plugging is not supported with this Hardware.
Legacy Document ID
Copyright © Lenovo 2013, all rights reserved